Yanmar
JH Series 28.7–92kW (39–125HP) Three and four-cylinder direct injection diesels with heat exchanger cooling. Choices of natural aspiration, turbocharged and turbo/aftercooler models, with straight drive or angle drive transmissions. Smaller horsepower models are also offered with Saildrive units. JH Series 4JH4-TE (75HP/55kW) ighly efficient and light in weight, this tough four-cylinder diesel is available with straight or angle drive, mechanically or hydraulically activated.
JH Series 28.7–92kW (39–125HP) Three and four-cylinder direct injection diesels with heat exchanger cooling. Choices of natural aspiration, turbocharged and turbo/aftercooler models, with straight drive or angle drive transmissions. Smaller horsepower models are also offered with Saildrive units. JH Series 3JH4 (39HP/28.7kW) The Yanmar's 3JH4 is an all-new naturally aspirated engine for sailboats and motor craft - quieter, cleaner and producing more torque - with the largest displacement and smallest dimensions in its class. It's fullfy compliant with EPA Tier 2 emissions regulations and with BSO/SAV Stage 2 requirements.
YANMAR’s new generation JH-Common Rail Series with class leading features out performs its competition. Compact, powerful, smooth, quiet, efficient and interconnective, the JH-CR Series is perfect for any application whether rib, tender, sailboat or catamaran, new or re-power. With over a 100 years of innovation, unequaled reliability, and the largest marine engine global service network, choosing a YANMAR ensures you will enjoy many safe and carefree years on the water.
YANMAR’s new generation JH-Common Rail Series with class leading features out performs its competition. Compact, powerful, smooth, quiet, efficient and interconnective, the JH-CR Series is perfect for any application whether rib, tender, sailboat or catamaran, new or re-power. With over a 100 years of innovation, unequaled reliability, and the largest marine engine global service network, choosing a YANMAR ensures you will enjoy many safe and carefree years on the water.
Yanmar’s successful wave-ribbed ‘monoblock’ cylinder block, stampforged carbon steel crankshafts and connecting rods are part of the story of strength in all CH engines. They also have a special thermocontrolled, fresh water cooling system that keeps all vital parts at optimum operating temperature, greatly saving wear and prolonging engine life. Another great advantage is the latest Yanmar marine gear, carefully matched by our own technicians to make the ideal combination of strength and smooth power drive. 95.6
LH Series 118–177kW (116–240HP) Tough, reliable, compact and with outstanding power-to-weight benefits, these four-cylinder direct injection Yanmars in the LH Series include sterndrive models. The turbocharger has a wastegate boost compensator to improve acceleration still further. LH Series 4LHAM-HTP (160HP/118kW) Turbocharged, direct injection four-cylinder diesel power with outstanding power to weight ratio. Supplied as bob-tail unit so that you can choose your transmission type.
For trolling, working nets, fish farms, for any low speed operation the diesel can''t be equalled. The special combustion chamber, new cooling system (with double thermostats) allow long hours of idling, cooling water temperature is kept high by the seawater thermostat, and at high sped the exhaust temperature thermostat lowers the cooling water temperature. The engine responds to the work speed.
Featuring the latest engine technologies, the 4LV Series is undoubtedly cleaner, quieter, and produces more torque & acceleration than any other engine in its class. The 4LV is the ideal solution for sailing yachts over 50 ft, super yacht tenders, small motorboats and light duty commercial vessels.The 4LV proves to be an extremely efficient engine without any compromise on quality. Featuring Thermo Swing Wall Insulation Technology and incorporating the newest system in common-rail technology, the mid-range engines deliver maximum performance and reliability, while maintaining minimal fuel consumption and exceptionally low noise & emission levels. By exceeding the strict EPA Tier 3 and EU RCD Stage 2 emission regulations, the engines feature virtually smoke and odor free operation.
For ski boats to fast sports craft to luxury cruisers – new build or repowering – the 8LV is at the forefront of today’s propulsion technology, providing the kind of high end performance associated with V8 gasolene engines, but with all of the solid, long-life and cost-effective benefi ts of diesel. This V8 can be matched perfectly with Yanmar’s latest twin-propeller sterndrive, the ZT370, or to a KMH50 inboard transmission. Yanmar remains dedicated to achieving maximum performance from minimum weight and the 8LV proves the point: another big displacement engine, weighing in dry at a mere 435 kilograms.
YM Series NEW 2YM15 (14HP/10.3kW) The all-new big displacement two-cylinders diesels from Yanmar gives you the easiest start, provides more power and produces outstanding torque at low engine speeds. It is even quiter with smoke virtually eliminated. Clean running, smooth and its outstanding size, power-to-weight benefits makes it suitable for double installation.
Featuring the latest engine technologies, the 4LV Series is undoubtedly cleaner, quieter, and produces more torque & acceleration than any other engine in its class. The 4LV is the ideal solution for sailing yachts over 50 ft, super yacht tenders, small motorboats and light duty commercial vessels.Equally, the 4LV doesn’t disappoint in performance. The 2.8 L displacement delivers a powerful low-end torque performance. This results in a stunning acceleration and really sets these engines apart from others in their power range.
The new 6LY takes the all the attributes of its forerunners and adds major engineering advances. The beating heart of the engine remains the international powerboat racewinning compact 5.8 -litre in-line six-cylinder YANMAR engine block that over three decades has cemented its popularity with boat designers, builders and owners who laud its performance, fuel efficiency, reliability and smooth and quiet operation.
For ski boats to fast sports craft to luxury cruisers – new build or repowering – the 8LV is at the forefront of today’s propulsion technology, providing the kind of high end performance associated with V8 gasolene engines, but with all of the solid, long-life and cost-effective benefi ts of diesel.The 8LV provides boaters with the best-in-class power band. It idles at 550 rpm, capable of crawling speed in the marina, aided further by the hydraulic clutch of the ZT370 or KMH50 drive systems. Maximum engine speed is a big 3,800 rpm – well ahead of other engines in this segment. You can enjoy high power, high torque. Low noise, low vibration. You can go much further on a tank of fuel. There is the advantage of a 12 volt, 180 amp alternator to charge all your onboard electrics. The 8LV uses Yanmar’s new CAN-bus control system, the Yanmar VCS, so you don’t have to rely on anyone else. Then there is easy installation, simple servicing, and all that worldwide Yanmar support, wherever, whenever.
YANMAR powerboat engines deliver outstanding power, speed, efficiency, and reliability. Our engines have proven to be the ideal solution for multiple applications, commercial and recreational, given a customizable options range - available for shaft, stern, and jet drives, with SOLAS and semi 2-pole option, high power primary and secondary alternators, purpose-built plug & play interconnectivity to any NMEA or J1939 device, and more. YANMAR engines deliver 5x Best in Class product features with the added benefit of the best global support network in the marine industry.
Featuring the latest engine technologies, the 4LV Series is undoubtedly cleaner, quieter, and produces more torque & acceleration than any other engine in its class. The 4LV is the ideal solution for sailing yachts over 50 ft, super yacht tenders, small motorboats and light duty commercial vessels.Combining the latest engine technologies, including new generation common-rail systems and the most advanced, complete combustion in YANMAR’s line, the 4LV Series is undoubtedly cleaner, quieter, and produces more torque & acceleration than any other engine in its class.
Featuring the latest engine technologies, the 4LV Series is undoubtedly cleaner, quieter, and produces more torque & acceleration than any other engine in its class. The 4LV is the ideal solution for sailing yachts over 50 ft, super yacht tenders, small motorboats and light duty commercial vessels.Equally, the 4LV doesn’t disappoint in performance. The 2.8 L displacement delivers a powerful low-end torque performance. This results in a stunning acceleration and really sets these engines apart from others in their power range.
The 6LF engine is a compact and powerful common rail diesel engine, perfect for planing and semi-planing vessels, both recreational and light duty commercial. Controlled by the YANMAR VC20 system, it expands YANMAR brand’s line with higher horsepower, providing the largest common rail, electronically managed marine diesel line-up in the industry.
Yanmar JH4 engines have been around a while now. Starting at 74 brake horsepower and rising to 108bhp, these Yanmar engines are the smallest in the manufacturer’s marine engine recreational range to have turbocharging. Both models have four valves per cylinder, though still with pushrod valve actuation, and mechanical engine management and straightforward distributor pump-type fuel injection for reliability. No potential issues with common rail here!
Used Yanmar 4JH110 110HP Inboard Diesel Engine - Sale !! (4JH110)
JH Series 28.7–92kW (39–125HP) Three and four-cylinder direct injection diesels with heat exchanger cooling. Choices of natural aspiration, turbocharged and turbo/aftercooler models, with straight drive or angle drive transmissions. Smaller horsepower models are also offered with Saildrive units. JH Series 4JH4-TE (75HP/55kW) ighly efficient and light in weight, this tough four-cylinder diesel is available with straight or angle drive, mechanically or hydraulically activated.
YANMAR sailing and smaller craft engines deliver the high-end performance and unequaled reliability associated with over 100 years of innovation. With the largest global support network in the marine engine industry and delivering 5x Best in Class features associated with common rail technology, YANMAR engines have become the global standard in sailboat and small craft propulsion.
ABOUT COMMON RAIL TECHNOLOGY
As a leading diesel engine manufacturer, YANMAR integrates the most advanced common rail technology into our innovative marine engines.
Common rail technology is a digitally controlled, high-pressure fuel injection and sensor system that optimizes engine efficiency & performance. This results in reduced emissions, minimal noise, and peak power output, significantly improving the engine’s overall efficiency and comfort onboard.
Multiple sensors throughout the engine intelligently feed operating conditions and performance requirements to the ECU. The system monitors the throttle position, various temperatures, rail and pressure, intake air pressures, and both crank and cam positions. Based on the feedback from the sensors, the ECU regulates fuel from the supply pump into a single high-pressure fuel rail and digitally activated injectors. This controls precisely when and how much fuel to inject. A common rail system can supply between one and five injections to each cylinder over the course of a cycle, rather than one single injection in a mechanically controlled fuel system.
Originally developed to meet strict automotive emissions regulations, the common rail technologies used in YANMAR’s marine engines have been custom marinized by YANMAR, specific to each YANMAR model and meeting YANMAR’s strict engineering standards. This brings you the latest technology in marine diesel engineering and our collection of 5x Best in Class engines.
Specifications
Rated Output
80.9 kW / 110 mhp
Rated Speed
3200 rpm
Displacement
2 L / 122 cu. in
No. of cylinders
4 cylinders
Cylinder Bore x Stroke
84 mm x 90 mm / 3.31 in x 3.54 in
Combustion system
Direct Injection, Bosch Common Rail System
Aspiration
Turbocharged & Intercooled
Alternator
12V - 125A
Dry weight without gear
229 kg / 505 lbs
Dimensions
909 mm x 613 mm x 675 mm
Controls
Mechanical (optional - VC10 system)
Certifications
RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length includes KM4A2 marine gear
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]
Alternator 12V – 125A
Seawater pump rear mounted
B25 panel
Flexible mounts
Mechanical throttle sensor
Fuel pre-filter with water separator
Fresh water expansion tank
Belt safety cover
Optional Accessories
High-riser mixing elbow [instead of L-elbow]
Secondary alternator 12V – 125A or 24V – 60A
Seawater pump front mounted
C35 panel
Extension harness [3m, 5m, 10m]
Second station
Sidemount control head
VC10 Vessel Control System
NMEA2000 Engine monitoring system
Semi 2-pole
SOLAS including Certificate [factory fit only]
Opposite dipstick
Hot water kit with cocks
Extension saildrive leg [75 mm]
Propeller cone nut kit SD60
On-board spare parts kit
Also you can check product : Used Yanmar 4BY2-150 110HP Inboard Diesel Engine - Sale !!
YANMAR sailing and smaller craft engines deliver the high-end performance and unequaled reliability associated with over 100 years of innovation. With the largest global support network in the marine engine industry and delivering 5x Best in Class features associated with common rail technology, YANMAR engines have become the global standard in sailboat and small craft propulsion.
ABOUT COMMON RAIL TECHNOLOGY
As a leading diesel engine manufacturer, YANMAR integrates the most advanced common rail technology into our innovative marine engines.
Common rail technology is a digitally controlled, high-pressure fuel injection and sensor system that optimizes engine efficiency & performance. This results in reduced emissions, minimal noise, and peak power output, significantly improving the engine’s overall efficiency and comfort onboard.
Multiple sensors throughout the engine intelligently feed operating conditions and performance requirements to the ECU. The system monitors the throttle position, various temperatures, rail and pressure, intake air pressures, and both crank and cam positions. Based on the feedback from the sensors, the ECU regulates fuel from the supply pump into a single high-pressure fuel rail and digitally activated injectors. This controls precisely when and how much fuel to inject. A common rail system can supply between one and five injections to each cylinder over the course of a cycle, rather than one single injection in a mechanically controlled fuel system.
Originally developed to meet strict automotive emissions regulations, the common rail technologies used in YANMAR’s marine engines have been custom marinized by YANMAR, specific to each YANMAR model and meeting YANMAR’s strict engineering standards. This brings you the latest technology in marine diesel engineering and our collection of 5x Best in Class engines.
Specifications
Rated Output
80.9 kW / 110 mhp
Rated Speed
3200 rpm
Displacement
2 L / 122 cu. in
No. of cylinders
4 cylinders
Cylinder Bore x Stroke
84 mm x 90 mm / 3.31 in x 3.54 in
Combustion system
Direct Injection, Bosch Common Rail System
Aspiration
Turbocharged & Intercooled
Alternator
12V - 125A
Dry weight without gear
229 kg / 505 lbs
Dimensions
909 mm x 613 mm x 675 mm
Controls
Mechanical (optional - VC10 system)
Certifications
RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length includes KM4A2 marine gear
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]
Alternator 12V – 125A
Seawater pump rear mounted
B25 panel
Flexible mounts
Mechanical throttle sensor
Fuel pre-filter with water separator
Fresh water expansion tank
Belt safety cover
Optional Accessories
High-riser mixing elbow [instead of L-elbow]
Secondary alternator 12V – 125A or 24V – 60A
Seawater pump front mounted
C35 panel
Extension harness [3m, 5m, 10m]
Second station
Sidemount control head
VC10 Vessel Control System
NMEA2000 Engine monitoring system
Semi 2-pole
SOLAS including Certificate [factory fit only]
Opposite dipstick
Hot water kit with cocks
Extension saildrive leg [75 mm]
Propeller cone nut kit SD60
On-board spare parts kit
Also you can check product : Used Yanmar 4BY2-150 110HP Inboard Diesel Engine - Sale !!
JH Series 28.7–92kW (39–125HP) Three and four-cylinder direct injection diesels with heat exchanger cooling. Choices of natural aspiration, turbocharged and turbo/aftercooler models, with straight drive or angle drive transmissions. Smaller horsepower models are also offered with Saildrive units. JH Series 4JH4-TE (75HP/55kW) ighly efficient and light in weight, this tough four-cylinder diesel is available with straight or angle drive, mechanically or hydraulically activated.
New Yanmar 4JH45E 53.8HP Inboard Diesel Engine - Sale !! (4JH45E)
JH Series 28.7–92kW (39–125HP) Three and four-cylinder direct injection diesels with heat exchanger cooling. Choices of natural aspiration, turbocharged and turbo/aftercooler models, with straight drive or angle drive transmissions. Smaller horsepower models are also offered with Saildrive units. JH Series 3JH4 (39HP/28.7kW) The Yanmar's 3JH4 is an all-new naturally aspirated engine for sailboats and motor craft - quieter, cleaner and producing more torque - with the largest displacement and smallest dimensions in its class. It's fullfy compliant with EPA Tier 2 emissions regulations and with BSO/SAV Stage 2 requirements.
Specifications
Rated Output
39.6 kW / 53.8 mhp
Rated Speed
3000 rpm
Displacement
2.19 L / 134 cu. in
No. of cylinders
4 cylinders
Cylinder Bore x Stroke
88 mm x 90 mm / 3.46 in x 3.54 in
Combustion system
Direct Injection, Mono Plunger Pump
Aspiration
Natural
Alternator
12V - 125A
Dry weight without gear
201 kg / 443 lbs
Dimensions
871 mm x 560 mm x 623 mm
Controls
Mechanical
Certifications
RCD 1 EPA Tier 2 BSO II EMC
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length includes KM35A marine gear
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]
Alternator 12V – 125A
B20 panel
Flexible mounts
Expansion tank for fresh water cooling system
Electric stop solenoid
Belt safety cover
Optional Accessories
High-riser mixing elbow [instead of L-elbow]
Secondary alternator 12V – 130A or 24V – 75A including smart regulator
C30 panel
Extension wire harness [4m, 6m, 10m]
Dual harness [for 2nd station]
TFX Sidemount control head
Hot water kit with cocks
Extension saildrive leg [75 mm]
Propeller cone nut kit SD60
Air heater [glow]
On-board spare parts kit
Also you can check product : New Yanmar 4JH45 45HP Inboard Diesel Engine - Sale !!
Specifications
Rated Output
39.6 kW / 53.8 mhp
Rated Speed
3000 rpm
Displacement
2.19 L / 134 cu. in
No. of cylinders
4 cylinders
Cylinder Bore x Stroke
88 mm x 90 mm / 3.46 in x 3.54 in
Combustion system
Direct Injection, Mono Plunger Pump
Aspiration
Natural
Alternator
12V - 125A
Dry weight without gear
201 kg / 443 lbs
Dimensions
871 mm x 560 mm x 623 mm
Controls
Mechanical
Certifications
RCD 1 EPA Tier 2 BSO II EMC
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length includes KM35A marine gear
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]
Alternator 12V – 125A
B20 panel
Flexible mounts
Expansion tank for fresh water cooling system
Electric stop solenoid
Belt safety cover
Optional Accessories
High-riser mixing elbow [instead of L-elbow]
Secondary alternator 12V – 130A or 24V – 75A including smart regulator
C30 panel
Extension wire harness [4m, 6m, 10m]
Dual harness [for 2nd station]
TFX Sidemount control head
Hot water kit with cocks
Extension saildrive leg [75 mm]
Propeller cone nut kit SD60
Air heater [glow]
On-board spare parts kit
Also you can check product : New Yanmar 4JH45 45HP Inboard Diesel Engine - Sale !!
JH Series 28.7–92kW (39–125HP) Three and four-cylinder direct injection diesels with heat exchanger cooling. Choices of natural aspiration, turbocharged and turbo/aftercooler models, with straight drive or angle drive transmissions. Smaller horsepower models are also offered with Saildrive units. JH Series 3JH4 (39HP/28.7kW) The Yanmar's 3JH4 is an all-new naturally aspirated engine for sailboats and motor craft - quieter, cleaner and producing more torque - with the largest displacement and smallest dimensions in its class. It's fullfy compliant with EPA Tier 2 emissions regulations and with BSO/SAV Stage 2 requirements.
New Yanmar 4JH57 57HP Inboard Diesel Engine - Sale !! (4JH57)
The new 4JH series of marine diesel engines from Yanmar were released in 2014. Developed based on 30 years of experiences with the previous JH series of marine engines, the new engines are based on Yanmar’s new TNV series of industrial diesel engines and incorporate proprietary control logic for marine propulsion engines.
ABOUT COMMON RAIL TECHNOLOGY
As a leading diesel engine manufacturer, YANMAR integrates the most advanced common rail technology into our innovative marine engines.
Common rail technology is a digitally controlled, high-pressure fuel injection and sensor system that optimizes engine efficiency & performance. This results in reduced emissions, minimal noise, and peak power output, significantly improving the engine’s overall efficiency and comfort onboard.
Multiple sensors throughout the engine intelligently feed operating conditions and performance requirements to the ECU. The system monitors the throttle position, various temperatures, rail and pressure, intake air pressures, and both crank and cam positions. Based on the feedback from the sensors, the ECU regulates fuel from the supply pump into a single high-pressure fuel rail and digitally activated injectors. This controls precisely when and how much fuel to inject. A common rail system can supply between one and five injections to each cylinder over the course of a cycle, rather than one single injection in a mechanically controlled fuel system.
Originally developed to meet strict automotive emissions regulations, the common rail technologies used in YANMAR’s marine engines have been custom marinized by YANMAR, specific to each YANMAR model and meeting YANMAR’s strict engineering standards. This brings you the latest technology in marine diesel engineering and our collection of 5x Best in Class engines.
Specifications
Rated Output
41.9 kW / 57 mhp
Rated Speed
3000 rpm
Displacement
2.19 L / 134 cu. in
No. of cylinders
4 cylinders
Cylinder Bore x Stroke
88 mm x 90 mm / 3.46 in x 3.54 in
Combustion system
Direct Injection, Bosch Common Rail System
Aspiration
Natural
Alternator
12V - 125A
Dry weight without gear
220 kg / 485 lbs
Dimensions
870 mm x 589 mm x 627 mm
Controls
Mechanical (optional - VC10 system)
Certifications
RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length includes KM35P marine gear
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]
Alternator 12V – 125A
B25 panel
Flexible mounts
Mechanical throttle sensor
Fuel pre-filter with water separator
Fresh water expansion tank
Belt safety cover
Optional Accessories
High-riser mixing elbow [instead of L-elbow]
Secondary alternator 12V – 125A or 24V – 60A
C35 panel
Extension harness [3m, 5m, 10m]
Second station
TFX Sidemount control head
VC10 Vessel Control System
NMEA2000 Engine monitoring system
Semi 2-pole
SOLAS including Certificate [factory fit only]
Hot water kit with cocks
Extension saildrive leg [75 mm]
Propeller cone nut kit SD60
On-board spare parts kit
Also you can check product : New Yanmar 4JH45E 53.8HP Inboard Diesel Engine - Sale !!
ABOUT COMMON RAIL TECHNOLOGY
As a leading diesel engine manufacturer, YANMAR integrates the most advanced common rail technology into our innovative marine engines.
Common rail technology is a digitally controlled, high-pressure fuel injection and sensor system that optimizes engine efficiency & performance. This results in reduced emissions, minimal noise, and peak power output, significantly improving the engine’s overall efficiency and comfort onboard.
Multiple sensors throughout the engine intelligently feed operating conditions and performance requirements to the ECU. The system monitors the throttle position, various temperatures, rail and pressure, intake air pressures, and both crank and cam positions. Based on the feedback from the sensors, the ECU regulates fuel from the supply pump into a single high-pressure fuel rail and digitally activated injectors. This controls precisely when and how much fuel to inject. A common rail system can supply between one and five injections to each cylinder over the course of a cycle, rather than one single injection in a mechanically controlled fuel system.
Originally developed to meet strict automotive emissions regulations, the common rail technologies used in YANMAR’s marine engines have been custom marinized by YANMAR, specific to each YANMAR model and meeting YANMAR’s strict engineering standards. This brings you the latest technology in marine diesel engineering and our collection of 5x Best in Class engines.
Specifications
Rated Output
41.9 kW / 57 mhp
Rated Speed
3000 rpm
Displacement
2.19 L / 134 cu. in
No. of cylinders
4 cylinders
Cylinder Bore x Stroke
88 mm x 90 mm / 3.46 in x 3.54 in
Combustion system
Direct Injection, Bosch Common Rail System
Aspiration
Natural
Alternator
12V - 125A
Dry weight without gear
220 kg / 485 lbs
Dimensions
870 mm x 589 mm x 627 mm
Controls
Mechanical (optional - VC10 system)
Certifications
RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length includes KM35P marine gear
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]
Alternator 12V – 125A
B25 panel
Flexible mounts
Mechanical throttle sensor
Fuel pre-filter with water separator
Fresh water expansion tank
Belt safety cover
Optional Accessories
High-riser mixing elbow [instead of L-elbow]
Secondary alternator 12V – 125A or 24V – 60A
C35 panel
Extension harness [3m, 5m, 10m]
Second station
TFX Sidemount control head
VC10 Vessel Control System
NMEA2000 Engine monitoring system
Semi 2-pole
SOLAS including Certificate [factory fit only]
Hot water kit with cocks
Extension saildrive leg [75 mm]
Propeller cone nut kit SD60
On-board spare parts kit
Also you can check product : New Yanmar 4JH45E 53.8HP Inboard Diesel Engine - Sale !!
YANMAR’s new generation JH-Common Rail Series with class leading features out performs its competition. Compact, powerful, smooth, quiet, efficient and interconnective, the JH-CR Series is perfect for any application whether rib, tender, sailboat or catamaran, new or re-power. With over a 100 years of innovation, unequaled reliability, and the largest marine engine global service network, choosing a YANMAR ensures you will enjoy many safe and carefree years on the water.
New Yanmar 4JH80 80HP Inboard Diesel Engine - Sale !! (4JH80)
YANMAR’s new generation JH-Common Rail Series with class leading features out performs its competition. Compact, powerful, smooth, quiet, efficient and interconnective, the JH-CR Series is perfect for any application whether rib, tender, sailboat or catamaran, new or re-power. With over a 100 years of innovation, unequaled reliability, and the largest marine engine global service network, choosing a YANMAR ensures you will enjoy many safe and carefree years on the water.
ABOUT COMMON RAIL TECHNOLOGY
As a leading diesel engine manufacturer, YANMAR integrates the most advanced common rail technology into our innovative marine engines.
Common rail technology is a digitally controlled, high-pressure fuel injection and sensor system that optimizes engine efficiency & performance. This results in reduced emissions, minimal noise, and peak power output, significantly improving the engine’s overall efficiency and comfort onboard.
Multiple sensors throughout the engine intelligently feed operating conditions and performance requirements to the ECU. The system monitors the throttle position, various temperatures, rail and pressure, intake air pressures, and both crank and cam positions. Based on the feedback from the sensors, the ECU regulates fuel from the supply pump into a single high-pressure fuel rail and digitally activated injectors. This controls precisely when and how much fuel to inject. A common rail system can supply between one and five injections to each cylinder over the course of a cycle, rather than one single injection in a mechanically controlled fuel system.
Originally developed to meet strict automotive emissions regulations, the common rail technologies used in YANMAR’s marine engines have been custom marinized by YANMAR, specific to each YANMAR model and meeting YANMAR’s strict engineering standards. This brings you the latest technology in marine diesel engineering and our collection of 5x Best in Class engines.
Specifications
Rated Output
58.8 kW / 80 mhp
Rated Speed
3200 rpm
Displacement
2 L / 122 cu. in
No. of cylinders
4 cylinders
Cylinder Bore x Stroke
84 mm x 90 mm / 3.31 in x 3.54 in
Combustion system
Direct Injection, Bosch Common Rail System
Aspiration
Turbocharged & Intercooled
Alternator
12V - 125A
Dry weight without gear
229 kg / 505 lbs
Dimensions
909 mm x 613 mm x 675 mm
Controls
Mechanical (optional - VC10 system)
Certifications
RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length includes KM4A2 marine gear
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]
Alternator 12V – 125A
Seawater pump rear mounted
B25 panel
Flexible mounts
Mechanical throttle sensor
Fuel pre-filter with water separator
Fresh water expansion tank
Belt safety cover
Optional Accessories
High-riser mixing elbow [instead of L-elbow]
Secondary alternator 12V – 125A or 24V – 60A
Seawater pump front mounted
C35 panel
Extension harness [3m, 5m, 10m]
Second station
Sidemount control head
VC10 Vessel Control System
NMEA2000 Engine monitoring system
Semi 2-pole
SOLAS including Certificate [factory fit only]
Opposite dipstick
Hot water kit with cocks
Extension saildrive leg [75 mm]
Propeller cone nut kit SD60
On-board spare parts kit
CONTROLS :
YD25
Compact switch panel with a 2.5” LCD display to view all YANMAR engine data, alarms, and diagnostic troubleshooting codes. Integrates with multifunction displays and glass helm systems, or can function as a standalone instrument display aboard smaller vessels.
YD42
Smart, multi-purpose instrument featuring a compact full color display, modern glass styling, with the ability to read and display YANMAR engine alarm and diagnostic troubleshooting codes. View engine speed, engine load, oil pressure, coolant temperature, wind, speed, depth, AIS data and more at a glance.
JC-20
The YANMAR JC20 inboard joystick system is suitable for every motorboat, powerboat, and catamaran equipped with twin YANMAR 4JH-CR, 4LV, 8LV-CR, and 6LY-CR Series common rail engines.
How it works
Simply press the joystick gently in the desired direction of movement and the JC20 will automatically engage the bow thruster and adjust the speed of the two shaft engines to maneuver the bow precisely where needed.
VC20
The VC20 is YANMAR’s 2nd generation vessel control system that controls all YANMAR electronically managed engines. Featuring simplified electrical management, a high-quality appearance, and significant functional improvements, the next generation YANMAR VC20 Vessel Control System integrates with YANMAR’s complete line up of common rail engine series, transmissions, controls, and displays.
The VC20 is a J1939 based CAN bus system that has a dedicated network to each engine and comes standard with an emergency back-up panel, ensuring the highest reliability. With NMEA connections built in, the VC20 can connect easily to multiple other vessel accessories or systems.
The system was completely developed by YANMAR to meet the company’s high standards of quality and dependability. The VC20 controls all YANMAR engine and transmission function and shows engine alarms and diagnostic codes in the display.
B25 & C35 PANELS
The B25 & C35 are YANMAR’s start/stop tachometer panels which are compatible with JH-CR and 4LV electronic YANMAR engines. These panels show basic parameters using traditional gages and have capability to show additional parameters, including Diagnostic Troubleshooting Codes (DTCs) in the smart tachometer window. The smart window can be programmed to show various other engine parameters as needed. These panels can also drive an optional fuel level gage.
B Panel: Includes Tachometer only
C Panel: Includes Tachometer, water temperature gauge, oil pressure gauge
Basic parameters shown:
Engine hours
Back light
Battery voltage
Throttle Position
Engine Load
Fuel Rate
Intake Air Pressure
Fuel temperature
Also you can check product New Yanmar 4JH3-DTE 125HP Inboard Diesel Engine - Sale !!
ABOUT COMMON RAIL TECHNOLOGY
As a leading diesel engine manufacturer, YANMAR integrates the most advanced common rail technology into our innovative marine engines.
Common rail technology is a digitally controlled, high-pressure fuel injection and sensor system that optimizes engine efficiency & performance. This results in reduced emissions, minimal noise, and peak power output, significantly improving the engine’s overall efficiency and comfort onboard.
Multiple sensors throughout the engine intelligently feed operating conditions and performance requirements to the ECU. The system monitors the throttle position, various temperatures, rail and pressure, intake air pressures, and both crank and cam positions. Based on the feedback from the sensors, the ECU regulates fuel from the supply pump into a single high-pressure fuel rail and digitally activated injectors. This controls precisely when and how much fuel to inject. A common rail system can supply between one and five injections to each cylinder over the course of a cycle, rather than one single injection in a mechanically controlled fuel system.
Originally developed to meet strict automotive emissions regulations, the common rail technologies used in YANMAR’s marine engines have been custom marinized by YANMAR, specific to each YANMAR model and meeting YANMAR’s strict engineering standards. This brings you the latest technology in marine diesel engineering and our collection of 5x Best in Class engines.
Specifications
Rated Output
58.8 kW / 80 mhp
Rated Speed
3200 rpm
Displacement
2 L / 122 cu. in
No. of cylinders
4 cylinders
Cylinder Bore x Stroke
84 mm x 90 mm / 3.31 in x 3.54 in
Combustion system
Direct Injection, Bosch Common Rail System
Aspiration
Turbocharged & Intercooled
Alternator
12V - 125A
Dry weight without gear
229 kg / 505 lbs
Dimensions
909 mm x 613 mm x 675 mm
Controls
Mechanical (optional - VC10 system)
Certifications
RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length includes KM4A2 marine gear
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]
Alternator 12V – 125A
Seawater pump rear mounted
B25 panel
Flexible mounts
Mechanical throttle sensor
Fuel pre-filter with water separator
Fresh water expansion tank
Belt safety cover
Optional Accessories
High-riser mixing elbow [instead of L-elbow]
Secondary alternator 12V – 125A or 24V – 60A
Seawater pump front mounted
C35 panel
Extension harness [3m, 5m, 10m]
Second station
Sidemount control head
VC10 Vessel Control System
NMEA2000 Engine monitoring system
Semi 2-pole
SOLAS including Certificate [factory fit only]
Opposite dipstick
Hot water kit with cocks
Extension saildrive leg [75 mm]
Propeller cone nut kit SD60
On-board spare parts kit
CONTROLS :
YD25
Compact switch panel with a 2.5” LCD display to view all YANMAR engine data, alarms, and diagnostic troubleshooting codes. Integrates with multifunction displays and glass helm systems, or can function as a standalone instrument display aboard smaller vessels.
YD42
Smart, multi-purpose instrument featuring a compact full color display, modern glass styling, with the ability to read and display YANMAR engine alarm and diagnostic troubleshooting codes. View engine speed, engine load, oil pressure, coolant temperature, wind, speed, depth, AIS data and more at a glance.
JC-20
The YANMAR JC20 inboard joystick system is suitable for every motorboat, powerboat, and catamaran equipped with twin YANMAR 4JH-CR, 4LV, 8LV-CR, and 6LY-CR Series common rail engines.
How it works
Simply press the joystick gently in the desired direction of movement and the JC20 will automatically engage the bow thruster and adjust the speed of the two shaft engines to maneuver the bow precisely where needed.
VC20
The VC20 is YANMAR’s 2nd generation vessel control system that controls all YANMAR electronically managed engines. Featuring simplified electrical management, a high-quality appearance, and significant functional improvements, the next generation YANMAR VC20 Vessel Control System integrates with YANMAR’s complete line up of common rail engine series, transmissions, controls, and displays.
The VC20 is a J1939 based CAN bus system that has a dedicated network to each engine and comes standard with an emergency back-up panel, ensuring the highest reliability. With NMEA connections built in, the VC20 can connect easily to multiple other vessel accessories or systems.
The system was completely developed by YANMAR to meet the company’s high standards of quality and dependability. The VC20 controls all YANMAR engine and transmission function and shows engine alarms and diagnostic codes in the display.
B25 & C35 PANELS
The B25 & C35 are YANMAR’s start/stop tachometer panels which are compatible with JH-CR and 4LV electronic YANMAR engines. These panels show basic parameters using traditional gages and have capability to show additional parameters, including Diagnostic Troubleshooting Codes (DTCs) in the smart tachometer window. The smart window can be programmed to show various other engine parameters as needed. These panels can also drive an optional fuel level gage.
B Panel: Includes Tachometer only
C Panel: Includes Tachometer, water temperature gauge, oil pressure gauge
Basic parameters shown:
Engine hours
Back light
Battery voltage
Throttle Position
Engine Load
Fuel Rate
Intake Air Pressure
Fuel temperature
Also you can check product New Yanmar 4JH3-DTE 125HP Inboard Diesel Engine - Sale !!
YANMAR’s new generation JH-Common Rail Series with class leading features out performs its competition. Compact, powerful, smooth, quiet, efficient and interconnective, the JH-CR Series is perfect for any application whether rib, tender, sailboat or catamaran, new or re-power. With over a 100 years of innovation, unequaled reliability, and the largest marine engine global service network, choosing a YANMAR ensures you will enjoy many safe and carefree years on the water.
New Yanmar 6CHE3 130 HP Propulsion Engines (High Speed) Rating L - Sale !! (6CHE3 130 HP)
DESCRIPTION
The work engines with top popularity ratings.
When it comes to selecting a high performance work engine you can’t do better than look at the wide CH range of Yanmar diesel. Running from 57.4kW to 206kW in a selection of 5 models there’s an engine here to match most workboat jobs. They are remarkable for their stable, high speed output and for the
refinements that have developed these veteran units into today’s highly sophisticated performers.
Superior top-end technology
To equip the UTE models for the special roles of high speed vessels they have such sophisticated features as a super-high pressure and incredibly precise injection pump, four valves per head and Yanmar’s unique ‘plum blossom’ piston crowns.
Time-tested toughness
Yanmar’s successful wave-ribbed ‘monoblock’ cylinder block, stampforged carbon steel crankshafts and connecting rods are part of the story of strength in all CH engines. They also have a special thermocontrolled, fresh water cooling system that keeps all vital parts at optimum operating temperature, greatly saving wear and prolonging engine life. Another great advantage is the latest Yanmar marine gear, carefully matched by our own technicians to make the ideal combination of strength and smooth power drive.
Servicing simplified
Features such as inspection hatches in the block, for six cylinder models, easy access to maintenance points and simple replacement of piston rings all help the owner keep his engine at work longer hours.
SPECS :
Number of cylinders
6 in line
Bore x stroke (mm)
105 x 125
Displacement (litre)
6.494
Rated output (kW(hp)/rpm)
M: 84.6(115)/2550
Rated output (kW(hp)/rpm)
L: 95.6(130)/2600
Combustion system
Direct injection
Aspiration
Naturally aspirated
Starting system
Electric starting motor (24v 4.0kW)
Cooling system
Heat exchanger
Dry mass (kg)
700
Also you can check : New Yanmar 4CHE3 78 HP Propulsion Engines (High Speed) Rating M - Sale !!
The work engines with top popularity ratings.
When it comes to selecting a high performance work engine you can’t do better than look at the wide CH range of Yanmar diesel. Running from 57.4kW to 206kW in a selection of 5 models there’s an engine here to match most workboat jobs. They are remarkable for their stable, high speed output and for the
refinements that have developed these veteran units into today’s highly sophisticated performers.
Superior top-end technology
To equip the UTE models for the special roles of high speed vessels they have such sophisticated features as a super-high pressure and incredibly precise injection pump, four valves per head and Yanmar’s unique ‘plum blossom’ piston crowns.
Time-tested toughness
Yanmar’s successful wave-ribbed ‘monoblock’ cylinder block, stampforged carbon steel crankshafts and connecting rods are part of the story of strength in all CH engines. They also have a special thermocontrolled, fresh water cooling system that keeps all vital parts at optimum operating temperature, greatly saving wear and prolonging engine life. Another great advantage is the latest Yanmar marine gear, carefully matched by our own technicians to make the ideal combination of strength and smooth power drive.
Servicing simplified
Features such as inspection hatches in the block, for six cylinder models, easy access to maintenance points and simple replacement of piston rings all help the owner keep his engine at work longer hours.
SPECS :
Number of cylinders
6 in line
Bore x stroke (mm)
105 x 125
Displacement (litre)
6.494
Rated output (kW(hp)/rpm)
M: 84.6(115)/2550
Rated output (kW(hp)/rpm)
L: 95.6(130)/2600
Combustion system
Direct injection
Aspiration
Naturally aspirated
Starting system
Electric starting motor (24v 4.0kW)
Cooling system
Heat exchanger
Dry mass (kg)
700
Also you can check : New Yanmar 4CHE3 78 HP Propulsion Engines (High Speed) Rating M - Sale !!
Yanmar’s successful wave-ribbed ‘monoblock’ cylinder block, stampforged carbon steel crankshafts and connecting rods are part of the story of strength in all CH engines. They also have a special thermocontrolled, fresh water cooling system that keeps all vital parts at optimum operating temperature, greatly saving wear and prolonging engine life. Another great advantage is the latest Yanmar marine gear, carefully matched by our own technicians to make the ideal combination of strength and smooth power drive. 95.6
New Yanmar 4LHA-HTP (Z) 160HP Inboard Diesel Engine - Sale !! (4LHA-HTP (Z))
LH Series 118–177kW (116–240HP) Tough, reliable, compact and with outstanding power-to-weight benefits, these four-cylinder direct injection Yanmars in the LH Series include sterndrive models. The turbocharger has a wastegate boost compensator to improve acceleration still further. LH Series 4LHAM-HTP (160HP/118kW) Turbocharged, direct injection four-cylinder diesel power with outstanding power to weight ratio. Supplied as bob-tail unit so that you can choose your transmission type.
Specifications
Rated Output
118 kW / 160 mhp
Rated Speed
3300 rpm
Displacement
3.455 L / 211 cu. in
No. of cylinders
4 cylinders
Cylinder Bore x Stroke
100 mm x 110 mm / 3.94 in x 4.25 in
Combustion system
Direct Injection, VE Rotary Pump
Aspiration
Turbocharged & Intercooled
Alternator
12V - 80A
Dry weight without gear
342 kg / 754 lbs
Dimensions
1131 mm x 719 mm x 811 mm
Controls
Mechanical
Certifications
RCD 1 BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 25°C at the inlet of the fuel injection pump (ISO 3046)
Dimensions include KMH50A gearbox and L-type elbow
(Dimensions may vary with other gears/elbow).
Also you can check product : New Yanmar 4LV170 (Z) 170HP Inboard Diesel Engine - Sale !!
Specifications
Rated Output
118 kW / 160 mhp
Rated Speed
3300 rpm
Displacement
3.455 L / 211 cu. in
No. of cylinders
4 cylinders
Cylinder Bore x Stroke
100 mm x 110 mm / 3.94 in x 4.25 in
Combustion system
Direct Injection, VE Rotary Pump
Aspiration
Turbocharged & Intercooled
Alternator
12V - 80A
Dry weight without gear
342 kg / 754 lbs
Dimensions
1131 mm x 719 mm x 811 mm
Controls
Mechanical
Certifications
RCD 1 BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 25°C at the inlet of the fuel injection pump (ISO 3046)
Dimensions include KMH50A gearbox and L-type elbow
(Dimensions may vary with other gears/elbow).
Also you can check product : New Yanmar 4LV170 (Z) 170HP Inboard Diesel Engine - Sale !!
LH Series 118–177kW (116–240HP) Tough, reliable, compact and with outstanding power-to-weight benefits, these four-cylinder direct injection Yanmars in the LH Series include sterndrive models. The turbocharger has a wastegate boost compensator to improve acceleration still further. LH Series 4LHAM-HTP (160HP/118kW) Turbocharged, direct injection four-cylinder diesel power with outstanding power to weight ratio. Supplied as bob-tail unit so that you can choose your transmission type.
Used Yanmar D27 Outboard Diesel Engine - Sale !! (D27)
About Yanmar D27
27HP, 3 cylinder diesel outboard engine, comes with 6 months fault free warranty, brand new fuel tank with hoses, fuel connectors and primary fuel pump. Also available in Tiller or RC versions, as well as L, LL and UL shaft lengths.
For trolling, working nets, fish farms, for any low speed operation the diesel can''t be equalled. The special combustion chamber, new cooling system (with double thermostats) allow long hours of idling, cooling water temperature is kept high by the seawater thermostat, and at high sped the exhaust temperature thermostat lowers the cooling water temperature. The engine responds to the work speed.
Technical specifications
Configuration 4-cycle, vertical, water cooled diesel engine
Number of cylinders 3
Bore and stroke mm (in.) 70 x 70 (2.76 x 2.76)
Displacement cc (cu. in.) 808 (49)
Maximum output hp(kW)/rpm at crankshaft 27hp/4500rpm (19.9kW/4500rpm)
Combustion system Direct injection
Starting system Electric with emergency rope start
Cooling system Direct seawater cooling by rubber impeller pump
Lubrication system Forced lubrication with trochoid pump
Generator AC dynamo built in flywheel
Drive device
Clutch type Dog type clutch
Reduction ratio Ahead/Astern 1.846/1.846
Direction of rotation Clockwise viewed from propeller
Lubrication system Oil bath
Tilt up system AX-E manual AX-EP hydraulic
Control device
Engine speed control Remote control
Clutch control Remote control
Steering Remote control
Transom installation Through bolts with nuts
Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1)
Fuel oil capacity l(cu.in) 24 (1465)
Lube oil Engine SAE 15W40, API CD/
Drive SAE 80W90, API Gear oil #90
Dry weight
L-type 94kgs (207lbs) 102kgs (225lbs)
LL-type 95kgs (209lbs) 103kgs (227lbs)
UL-type 96kgs (212lbs) 104kgs (229lbs)
Also you can check product : New Yanmar 1GM10 9HP Inboard Diesel Engine - Sale !!
Also you can check product : New Yanmar 1GM10 9HP Inboard Diesel Engine - Sale !!
For trolling, working nets, fish farms, for any low speed operation the diesel can''t be equalled. The special combustion chamber, new cooling system (with double thermostats) allow long hours of idling, cooling water temperature is kept high by the seawater thermostat, and at high sped the exhaust temperature thermostat lowers the cooling water temperature. The engine responds to the work speed.
New Yanmar 4LV250 (Z) 250HP Inboard Diesel Engine - Sale !! (4LV250 (Z))
YANMAR powerboat engines deliver outstanding power, speed, efficiency, and reliability. Our engines have proven to be the ideal solution for multiple applications, commercial and recreational, given a customizable options range - available for shaft, stern, and jet drives, with SOLAS and semi 2-pole option, high power primary and secondary alternators, purpose-built plug & play interconnectivity to any NMEA or J1939 device, and more. YANMAR engines deliver 5x Best in Class product features with the added benefit of the best global support network in the marine industry.
Combining the latest engine technologies, including new generation common-rail systems and the most advanced, complete combustion in YANMAR’s line, the 4LV Series is undoubtedly cleaner, quieter, and produces more torque & acceleration than any other engine in its class.
The 4LV proves to be an extremely efficient engine without any compromise on quality. Featuring Thermo Swing Wall Insulation Technology and incorporating the newest system in common-rail technology, the mid-range engines deliver maximum performance and reliability, while maintaining minimal fuel consumption and exceptionally low noise & emission levels. By exceeding the strict EPA Tier 3 and EU RCD Stage 2 emission regulations, the engines feature virtually smoke and odor free operation.
Equally, the 4LV doesn’t disappoint in performance. The 2.8 L displacement delivers a powerful low-end torque performance. This results in a stunning acceleration and really sets these engines apart from others in their power range.
To ensure support of advancing marine technologies, direct connectivity to NMEA and J1939 CAN-bus networks has been purpose engineered into the 4LV range, allowing future-proofed integration to any multifunction bridge display.
Over and above the impressive performance, the resounding benefit of the 4LV Series remains its versatility. Fulfilling needs across all boating applications, the 4LV is the perfect solution for new builds and repowering. It is compact and easily fits into previous model footprints. An ideal installation for sailboats, motor boats, or light commercial vessels, the 4LV range will be complemented by a choice of YANMAR’s expanding controls, including the VC10 electronic control panel, providing real time diagnostics, and the JC20 joystick system, providing innovative maneuvering solutions.
Specifications
Rated Output
184 kW / 250 mhp
Rated Speed
3800 rpm
Displacement
2.755 L / 168 cu. in
No. of cylinders
4 cylinders
Cylinder Bore x Stroke
92 mm x 103.6 mm / 3.6 in x 4 in
Combustion system
Direct Injection, Denso Common Rail System
Aspiration
Turbocharged & Intercooled
Alternator
Denso 12V - 130A
Dry weight without gear
334 kg / 736 lbs
Dimensions
1151 mm x 755 mm x 772 mm
Controls
Mechanical (optional - VC10 system)
Certifications
RCD 2 IMO Tier 2 EPA Tier 3 BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length includes KMH50A marine gear
(Dimensions may vary with other gears/elbow)
*Please note, the 4LV250 is not EPA Commercial certified.
Standard Engine Package
Exhaust mixing elbow [L-type]*
Through drive exhaust**
Alternator 12V – 130A
B25 panel*
VC10 Vessel Control System**
Power steering**
Mechanical throttle sensor*
Flexible mounts
Fresh water expansion tank
*Inboard model
**Sterndrive model
Optional Accessories
High-riser mixing elbow [instead of L-elbow]*
Through hull exhaust**
Secondary alternator 12V – 130A or 24V – 110A including smart regulator
Extension harness [3m, 5m, 10m, 20m]
Second station
C35 panel*
Sidemount control head*
VC10 Vessel Control System*
JC20 Inboard Joystick*
JC10 Sterndrive Joystick**
NMEA2000 Engine monitoring system
Internal tie-bar
Semi 2-pole
SOLAS including Certificate [factory fit only]
Hot water connection
Water separator
Man Over Board Switch (single)
C-Type trolling (KMH50 only)*
On-board spare parts kit
Also you can check : New Yanmar 8LV320 (Z) 320HP Inboard Diesel Engine - Sale !!
Combining the latest engine technologies, including new generation common-rail systems and the most advanced, complete combustion in YANMAR’s line, the 4LV Series is undoubtedly cleaner, quieter, and produces more torque & acceleration than any other engine in its class.
The 4LV proves to be an extremely efficient engine without any compromise on quality. Featuring Thermo Swing Wall Insulation Technology and incorporating the newest system in common-rail technology, the mid-range engines deliver maximum performance and reliability, while maintaining minimal fuel consumption and exceptionally low noise & emission levels. By exceeding the strict EPA Tier 3 and EU RCD Stage 2 emission regulations, the engines feature virtually smoke and odor free operation.
Equally, the 4LV doesn’t disappoint in performance. The 2.8 L displacement delivers a powerful low-end torque performance. This results in a stunning acceleration and really sets these engines apart from others in their power range.
To ensure support of advancing marine technologies, direct connectivity to NMEA and J1939 CAN-bus networks has been purpose engineered into the 4LV range, allowing future-proofed integration to any multifunction bridge display.
Over and above the impressive performance, the resounding benefit of the 4LV Series remains its versatility. Fulfilling needs across all boating applications, the 4LV is the perfect solution for new builds and repowering. It is compact and easily fits into previous model footprints. An ideal installation for sailboats, motor boats, or light commercial vessels, the 4LV range will be complemented by a choice of YANMAR’s expanding controls, including the VC10 electronic control panel, providing real time diagnostics, and the JC20 joystick system, providing innovative maneuvering solutions.
Specifications
Rated Output
184 kW / 250 mhp
Rated Speed
3800 rpm
Displacement
2.755 L / 168 cu. in
No. of cylinders
4 cylinders
Cylinder Bore x Stroke
92 mm x 103.6 mm / 3.6 in x 4 in
Combustion system
Direct Injection, Denso Common Rail System
Aspiration
Turbocharged & Intercooled
Alternator
Denso 12V - 130A
Dry weight without gear
334 kg / 736 lbs
Dimensions
1151 mm x 755 mm x 772 mm
Controls
Mechanical (optional - VC10 system)
Certifications
RCD 2 IMO Tier 2 EPA Tier 3 BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length includes KMH50A marine gear
(Dimensions may vary with other gears/elbow)
*Please note, the 4LV250 is not EPA Commercial certified.
Standard Engine Package
Exhaust mixing elbow [L-type]*
Through drive exhaust**
Alternator 12V – 130A
B25 panel*
VC10 Vessel Control System**
Power steering**
Mechanical throttle sensor*
Flexible mounts
Fresh water expansion tank
*Inboard model
**Sterndrive model
Optional Accessories
High-riser mixing elbow [instead of L-elbow]*
Through hull exhaust**
Secondary alternator 12V – 130A or 24V – 110A including smart regulator
Extension harness [3m, 5m, 10m, 20m]
Second station
C35 panel*
Sidemount control head*
VC10 Vessel Control System*
JC20 Inboard Joystick*
JC10 Sterndrive Joystick**
NMEA2000 Engine monitoring system
Internal tie-bar
Semi 2-pole
SOLAS including Certificate [factory fit only]
Hot water connection
Water separator
Man Over Board Switch (single)
C-Type trolling (KMH50 only)*
On-board spare parts kit
Also you can check : New Yanmar 8LV320 (Z) 320HP Inboard Diesel Engine - Sale !!
Featuring the latest engine technologies, the 4LV Series is undoubtedly cleaner, quieter, and produces more torque & acceleration than any other engine in its class. The 4LV is the ideal solution for sailing yachts over 50 ft, super yacht tenders, small motorboats and light duty commercial vessels.The 4LV proves to be an extremely efficient engine without any compromise on quality. Featuring Thermo Swing Wall Insulation Technology and incorporating the newest system in common-rail technology, the mid-range engines deliver maximum performance and reliability, while maintaining minimal fuel consumption and exceptionally low noise & emission levels. By exceeding the strict EPA Tier 3 and EU RCD Stage 2 emission regulations, the engines feature virtually smoke and odor free operation.
New Yanmar 8LV370 (Z) 370HP Inboard Diesel Engine - Sale !! (8LV370 (Z))
For ski boats to fast sports craft to luxury cruisers – new build or repowering – the 8LV is at the forefront of today’s propulsion technology, providing the kind of high end performance associated with V8 gasolene engines, but with all of the solid, long-life and cost-effective benefi ts of diesel. This V8 can be matched perfectly with Yanmar’s latest twin-propeller sterndrive, the ZT370, or to a KMH50 inboard transmission. Yanmar remains dedicated to achieving maximum performance from minimum weight and the 8LV proves the point: another big displacement engine, weighing in dry at a mere 435 kilograms.
The 8LV provides boaters with the best-in-class power band. It idles at 550 rpm, capable of crawling speed in the marina, aided further by the hydraulic clutch of the ZT370 or KMH50 drive systems. Maximum engine speed is a big 3,800 rpm – well ahead of other engines in this segment. You can enjoy high power, high torque. Low noise, low vibration. You can go much further on a tank of fuel. There is the advantage of a 12 volt, 180 amp alternator to charge all your onboard electrics. The 8LV uses Yanmar’s new CAN-bus control system, the Yanmar VCS, so you don’t have to rely on anyone else. Then there is easy installation, simple servicing, and all that worldwide Yanmar support, wherever, whenever.
Specifications
Rated Output
272 kW / 370 mhp
Rated Speed
3800 rpm
Displacement
4.46 L / 272 cu. in
No. of cylinders
8 cylinders
Cylinder Bore x Stroke
86 mm x 96 mm / 3.38 in x 3.78 in
Combustion system
Direct Injection, Denso Common Rail System
Aspiration
Twin Turbocharged & Intercooled
Alternator
12V - 180A
Dry weight without gear
435 kg / 959 lbs
Dimensions
1340 mm x 880 mm x 766 mm
Controls
Electronic
Certifications
RCD 2 IMO Tier 2 EPA Tier 3 BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Dimensions includes KMH50A gearbox with standard mixing elbow
Measured with through drive exhaust, without sterndrive (1043mm x 886mm x 1198mm)
(Dimensions may vary with other gears/elbow)
*Please note, the 8LV370 is not EPA Commercial certified.
Standard Engine Package
Exhaust mixing elbow [L-type]*
Through drive exhaust**
Alternator 12V – 180A
VC10 Vessel Control System
Power steering**
Flexible mounts
Fresh water expansion tank
*Inboard model
**Sterndrive model
Optional Accessories
High-riser mixing elbow [instead of L-elbow]*
Through hull exhaust**
Extension harness [3m, 5m, 10m]
Second station
JC20 Inboard Joystick*
JC10 Sterndrive Joystick**
NMEA2000 Engine monitoring system
SOLAS including Certificate [factory fit only]
Hot water connection
Water separator
Front PTO pully [V-belt type A or B]
Power steering pump*
Power steering cooler*
Electric shift**
Exhaust cooling water bypass
Lube oil drain pump
Bilge pump [12V]
Opposite dipstick
Also you can check product : Used Yanmar D36 Outboard Diesel Engine - Sale !!
The 8LV provides boaters with the best-in-class power band. It idles at 550 rpm, capable of crawling speed in the marina, aided further by the hydraulic clutch of the ZT370 or KMH50 drive systems. Maximum engine speed is a big 3,800 rpm – well ahead of other engines in this segment. You can enjoy high power, high torque. Low noise, low vibration. You can go much further on a tank of fuel. There is the advantage of a 12 volt, 180 amp alternator to charge all your onboard electrics. The 8LV uses Yanmar’s new CAN-bus control system, the Yanmar VCS, so you don’t have to rely on anyone else. Then there is easy installation, simple servicing, and all that worldwide Yanmar support, wherever, whenever.
Specifications
Rated Output
272 kW / 370 mhp
Rated Speed
3800 rpm
Displacement
4.46 L / 272 cu. in
No. of cylinders
8 cylinders
Cylinder Bore x Stroke
86 mm x 96 mm / 3.38 in x 3.78 in
Combustion system
Direct Injection, Denso Common Rail System
Aspiration
Twin Turbocharged & Intercooled
Alternator
12V - 180A
Dry weight without gear
435 kg / 959 lbs
Dimensions
1340 mm x 880 mm x 766 mm
Controls
Electronic
Certifications
RCD 2 IMO Tier 2 EPA Tier 3 BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Dimensions includes KMH50A gearbox with standard mixing elbow
Measured with through drive exhaust, without sterndrive (1043mm x 886mm x 1198mm)
(Dimensions may vary with other gears/elbow)
*Please note, the 8LV370 is not EPA Commercial certified.
Standard Engine Package
Exhaust mixing elbow [L-type]*
Through drive exhaust**
Alternator 12V – 180A
VC10 Vessel Control System
Power steering**
Flexible mounts
Fresh water expansion tank
*Inboard model
**Sterndrive model
Optional Accessories
High-riser mixing elbow [instead of L-elbow]*
Through hull exhaust**
Extension harness [3m, 5m, 10m]
Second station
JC20 Inboard Joystick*
JC10 Sterndrive Joystick**
NMEA2000 Engine monitoring system
SOLAS including Certificate [factory fit only]
Hot water connection
Water separator
Front PTO pully [V-belt type A or B]
Power steering pump*
Power steering cooler*
Electric shift**
Exhaust cooling water bypass
Lube oil drain pump
Bilge pump [12V]
Opposite dipstick
Also you can check product : Used Yanmar D36 Outboard Diesel Engine - Sale !!
For ski boats to fast sports craft to luxury cruisers – new build or repowering – the 8LV is at the forefront of today’s propulsion technology, providing the kind of high end performance associated with V8 gasolene engines, but with all of the solid, long-life and cost-effective benefi ts of diesel. This V8 can be matched perfectly with Yanmar’s latest twin-propeller sterndrive, the ZT370, or to a KMH50 inboard transmission. Yanmar remains dedicated to achieving maximum performance from minimum weight and the 8LV proves the point: another big displacement engine, weighing in dry at a mere 435 kilograms.
New Yanmar 2YM15 14HP Inboard Diesel Engine - Sale !! (2YM15)
YM Series NEW 2YM15 (14HP/10.3kW) The all-new big displacement two-cylinders diesels from Yanmar gives you the easiest start, provides more power and produces outstanding torque at low engine speeds. It is even quiter with smoke virtually eliminated. Clean running, smooth and its outstanding size, power-to-weight benefits makes it suitable for double installation.
Specifications
Rated Output
10 kW / 14 mhp
Rated Speed
3600 rpm
Displacement
0.57 L / 34.7 cu. in
No. of cylinders
2 cylinders
Cylinder Bore x Stroke
70 mm x 74 mm / 2.75 in x 2.91 in
Combustion system
Indirect Injection, In-line Pump
Aspiration
Natural
Alternator
12V - 125A
Dry weight without gear
103 kg / 227 lbs
Dimensions
613 mm x 463 mm x 600 mm
Controls
Mechanical
Certifications
RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length includes KM2P-1 marine gear & height includes U-type elbow
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]
Alternator 12V – 125A
B20 panel
Flexible mounts
Expansion tank for fresh water cooling system
Electric stop solenoid
Belt safety cover
Optional Accessories
High-riser mixing elbow [instead of L-elbow]
Extension wire harness [4m, 6m]
Dual harness [for 2nd station]
TFX Sidemount control head
Hot water kit with cocks
Extension saildrive leg [50 mm]
Propeller cone nut kit SD25
On-board spare parts kit
Also you can check product : New Yanmar 2YM15 14HP Inboard Diesel Engine - Sale !!
Specifications
Rated Output
10 kW / 14 mhp
Rated Speed
3600 rpm
Displacement
0.57 L / 34.7 cu. in
No. of cylinders
2 cylinders
Cylinder Bore x Stroke
70 mm x 74 mm / 2.75 in x 2.91 in
Combustion system
Indirect Injection, In-line Pump
Aspiration
Natural
Alternator
12V - 125A
Dry weight without gear
103 kg / 227 lbs
Dimensions
613 mm x 463 mm x 600 mm
Controls
Mechanical
Certifications
RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length includes KM2P-1 marine gear & height includes U-type elbow
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]
Alternator 12V – 125A
B20 panel
Flexible mounts
Expansion tank for fresh water cooling system
Electric stop solenoid
Belt safety cover
Optional Accessories
High-riser mixing elbow [instead of L-elbow]
Extension wire harness [4m, 6m]
Dual harness [for 2nd station]
TFX Sidemount control head
Hot water kit with cocks
Extension saildrive leg [50 mm]
Propeller cone nut kit SD25
On-board spare parts kit
Also you can check product : New Yanmar 2YM15 14HP Inboard Diesel Engine - Sale !!
YM Series NEW 2YM15 (14HP/10.3kW) The all-new big displacement two-cylinders diesels from Yanmar gives you the easiest start, provides more power and produces outstanding torque at low engine speeds. It is even quiter with smoke virtually eliminated. Clean running, smooth and its outstanding size, power-to-weight benefits makes it suitable for double installation.
New Yanmar 4LV150 (Z) 150HP Inboard Diesel Engine - Sale !! (4LV150 (Z))
YANMAR powerboat engines deliver outstanding power, speed, efficiency, and reliability. Our engines have proven to be the ideal solution for multiple applications, commercial and recreational, given a customizable options range - available for shaft, stern, and jet drives, with SOLAS and semi 2-pole option, high power primary and secondary alternators, purpose-built plug & play interconnectivity to any NMEA or J1939 device, and more. YANMAR engines deliver 5x Best in Class product features with the added benefit of the best global support network in the marine industry.
Combining the latest engine technologies, including new generation common-rail systems and the most advanced, complete combustion in YANMAR’s line, the 4LV Series is undoubtedly cleaner, quieter, and produces more torque & acceleration than any other engine in its class.
The 4LV proves to be an extremely efficient engine without any compromise on quality. Featuring Thermo Swing Wall Insulation Technology and incorporating the newest system in common-rail technology, the mid-range engines deliver maximum performance and reliability, while maintaining minimal fuel consumption and exceptionally low noise & emission levels. By exceeding the strict EPA Tier 3 and EU RCD Stage 2 emission regulations, the engines feature virtually smoke and odor free operation.
Equally, the 4LV doesn’t disappoint in performance. The 2.8 L displacement delivers a powerful low-end torque performance. This results in a stunning acceleration and really sets these engines apart from others in their power range.
To ensure support of advancing marine technologies, direct connectivity to NMEA and J1939 CAN-bus networks has been purpose engineered into the 4LV range, allowing future-proofed integration to any multifunction bridge display.
Over and above the impressive performance, the resounding benefit of the 4LV Series remains its versatility. Fulfilling needs across all boating applications, the 4LV is the perfect solution for new builds and repowering. It is compact and easily fits into previous model footprints. An ideal installation for sailboats, motor boats, or light commercial vessels, the 4LV range will be complemented by a choice of YANMAR’s expanding controls, including the VC10 electronic control panel, providing real time diagnostics, and the JC20 joystick system, providing innovative maneuvering solutions.
Specifications
Rated Output
110 kW / 150 mhp
Rated Speed
3500 rpm
Displacement
2.755 L / 168 cu. in
No. of cylinders
4 cylinders
Cylinder Bore x Stroke
92 mm x 103.6 mm / 3.6 in x 4 in
Combustion system
Direct Injection, Denso Common Rail System
Aspiration
Turbocharged & Intercooled
Alternator
Denso 12V - 130A
Dry weight without gear
334 kg / 736 lbs
Dimensions
1151 mm x 755 mm x 772 mm
Controls
Mechanical (optional - VC10 system)
Certifications
RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length includes KMH50A marine gear
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]*
Through drive exhaust**
Alternator 12V – 130A
B25 panel*
VC10 Vessel Control System**
Power steering**
Mechanical throttle sensor*
Flexible mounts
Fresh water expansion tank
Optional Accessories
High-riser mixing elbow [instead of L-elbow]*
Through hull exhaust**
Secondary alternator 12V – 130A or 24V – 110A including smart regulator
Extension harness [3m, 5m, 10m, 20m]
Second station
C35 panel*
Sidemount control head*
VC10 Vessel Control System*
JC20 Inboard Joystick*
JC10 Sterndrive Joystick**
NMEA2000 Engine monitoring system
Internal tie-bar
Semi 2-pole
SOLAS including Certificate [factory fit only]
Hot water connection
Water separator
Man Over Board Switch (single)
C-Type trolling (KMH50 only)*
On-board spare parts kit
Also you can check product : New Yanmar 4LHA-HTP (Z) 160HP Inboard Diesel Engine - Sale !!
Combining the latest engine technologies, including new generation common-rail systems and the most advanced, complete combustion in YANMAR’s line, the 4LV Series is undoubtedly cleaner, quieter, and produces more torque & acceleration than any other engine in its class.
The 4LV proves to be an extremely efficient engine without any compromise on quality. Featuring Thermo Swing Wall Insulation Technology and incorporating the newest system in common-rail technology, the mid-range engines deliver maximum performance and reliability, while maintaining minimal fuel consumption and exceptionally low noise & emission levels. By exceeding the strict EPA Tier 3 and EU RCD Stage 2 emission regulations, the engines feature virtually smoke and odor free operation.
Equally, the 4LV doesn’t disappoint in performance. The 2.8 L displacement delivers a powerful low-end torque performance. This results in a stunning acceleration and really sets these engines apart from others in their power range.
To ensure support of advancing marine technologies, direct connectivity to NMEA and J1939 CAN-bus networks has been purpose engineered into the 4LV range, allowing future-proofed integration to any multifunction bridge display.
Over and above the impressive performance, the resounding benefit of the 4LV Series remains its versatility. Fulfilling needs across all boating applications, the 4LV is the perfect solution for new builds and repowering. It is compact and easily fits into previous model footprints. An ideal installation for sailboats, motor boats, or light commercial vessels, the 4LV range will be complemented by a choice of YANMAR’s expanding controls, including the VC10 electronic control panel, providing real time diagnostics, and the JC20 joystick system, providing innovative maneuvering solutions.
Specifications
Rated Output
110 kW / 150 mhp
Rated Speed
3500 rpm
Displacement
2.755 L / 168 cu. in
No. of cylinders
4 cylinders
Cylinder Bore x Stroke
92 mm x 103.6 mm / 3.6 in x 4 in
Combustion system
Direct Injection, Denso Common Rail System
Aspiration
Turbocharged & Intercooled
Alternator
Denso 12V - 130A
Dry weight without gear
334 kg / 736 lbs
Dimensions
1151 mm x 755 mm x 772 mm
Controls
Mechanical (optional - VC10 system)
Certifications
RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length includes KMH50A marine gear
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]*
Through drive exhaust**
Alternator 12V – 130A
B25 panel*
VC10 Vessel Control System**
Power steering**
Mechanical throttle sensor*
Flexible mounts
Fresh water expansion tank
Optional Accessories
High-riser mixing elbow [instead of L-elbow]*
Through hull exhaust**
Secondary alternator 12V – 130A or 24V – 110A including smart regulator
Extension harness [3m, 5m, 10m, 20m]
Second station
C35 panel*
Sidemount control head*
VC10 Vessel Control System*
JC20 Inboard Joystick*
JC10 Sterndrive Joystick**
NMEA2000 Engine monitoring system
Internal tie-bar
Semi 2-pole
SOLAS including Certificate [factory fit only]
Hot water connection
Water separator
Man Over Board Switch (single)
C-Type trolling (KMH50 only)*
On-board spare parts kit
Also you can check product : New Yanmar 4LHA-HTP (Z) 160HP Inboard Diesel Engine - Sale !!
Featuring the latest engine technologies, the 4LV Series is undoubtedly cleaner, quieter, and produces more torque & acceleration than any other engine in its class. The 4LV is the ideal solution for sailing yachts over 50 ft, super yacht tenders, small motorboats and light duty commercial vessels.Equally, the 4LV doesn’t disappoint in performance. The 2.8 L displacement delivers a powerful low-end torque performance. This results in a stunning acceleration and really sets these engines apart from others in their power range.
New Yanmar 6LY400 400HP Inboard Diesel Engine - Sale !! (6LY400)
The new 6LY takes the all the attributes of its forerunners and adds major engineering advances. The beating heart of the engine remains the international powerboat racewinning compact 5.8 -litre in-line six-cylinder YANMAR engine block that over three decades has cemented its popularity with boat designers, builders and owners who laud its performance, fuel efficiency, reliability and smooth and quiet operation.
This latest incarnation has taken the engine into a new era of mechanical and digital sophistication. We have completely re-engineered the fuel induction and aspiration systems - all functions now being managed by state-of-the-art electronic precision for even better all-round performance. We’ve replaced single injectors with a high-pressure common-rail fuel system to deliver exceptionally finely atomised fuel to the cylinders for better power-to-weight performance, fuel economy and smooth running.
IMPRESSIVELY CLEAN AND POWERFUL PERFORMANCE
Built on 30 years of history, the 4th generation 6LY is a smooth and robust 6 cylinder in-line engine, producing impressively clean and powerful performance.
Incorporating an advanced Denso common rail fuel injection system, the 6LY-CR delivers excellent fuel economy and significantly less noise than previous generations, while the high torque output throughout its full operating range produces class leading acceleration and responsive performance.
Its narrow and lightweight profile enables installation in the tightest of engine rooms, making it the perfect solution for repowering, as well as newly built vessels.
DETAILS
Available in 2 output models – 400 and 440 mhp
A proven solution for jet and shaft drives
Controlled electronically by YANMAR VC10 Vessel Control System, with up to 4 stations
Available with JC20 joystick control for twin shaftdrive applications
Certified for recreational and light duty commercial applications
SOLAS option and USCG lifeboat approved
Specifications
Rated Output
294 kW / 400 mhp
Rated Speed
3300 rpm
Displacement
5.813 L / 354 cu. in
No. of cylinders
6 cylinders
Cylinder Bore x Stroke
106 mm x 110 mm / 4.17 in x 4.33 in
Combustion system
Direct Injection, Denso Common Rail System
Aspiration
Turbocharged & Intercooled
Alternator
12V - 125A
Dry weight without gear
585 kg / 1290 lbs
Dimensions
1440 mm x 748.5 mm x 773.8 mm
Controls
Electronic
Certifications
RCD 2 IMO Tier 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length measured with with KMH61A-2 gearbox & high-riser elbow
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]
Alternator 12V – 120A
VC10 Vessel Control System
Fresh water expansion tank
Optional Accessories
High-riser mixing elbow [instead of L-elbow]
Flexible mounts Barry
Flexible mounts Bridgestone
Secondary alternator 12V – 120A or 24V – 45A
Extension harness [3m, 5m, 10m]
Second station
JC20 Inboard Joystick
NMEA2000 Engine monitoring system
SOLAS including Certificate [factory fit only]
Hot water kit
Water separator
Lube oil drain pump
Bilge pump [12V]
Also you can check product : New Yanmar 4CHE3 78 HP Propulsion Engines (High Speed) Rating M - Sale !!
This latest incarnation has taken the engine into a new era of mechanical and digital sophistication. We have completely re-engineered the fuel induction and aspiration systems - all functions now being managed by state-of-the-art electronic precision for even better all-round performance. We’ve replaced single injectors with a high-pressure common-rail fuel system to deliver exceptionally finely atomised fuel to the cylinders for better power-to-weight performance, fuel economy and smooth running.
IMPRESSIVELY CLEAN AND POWERFUL PERFORMANCE
Built on 30 years of history, the 4th generation 6LY is a smooth and robust 6 cylinder in-line engine, producing impressively clean and powerful performance.
Incorporating an advanced Denso common rail fuel injection system, the 6LY-CR delivers excellent fuel economy and significantly less noise than previous generations, while the high torque output throughout its full operating range produces class leading acceleration and responsive performance.
Its narrow and lightweight profile enables installation in the tightest of engine rooms, making it the perfect solution for repowering, as well as newly built vessels.
DETAILS
Available in 2 output models – 400 and 440 mhp
A proven solution for jet and shaft drives
Controlled electronically by YANMAR VC10 Vessel Control System, with up to 4 stations
Available with JC20 joystick control for twin shaftdrive applications
Certified for recreational and light duty commercial applications
SOLAS option and USCG lifeboat approved
Specifications
Rated Output
294 kW / 400 mhp
Rated Speed
3300 rpm
Displacement
5.813 L / 354 cu. in
No. of cylinders
6 cylinders
Cylinder Bore x Stroke
106 mm x 110 mm / 4.17 in x 4.33 in
Combustion system
Direct Injection, Denso Common Rail System
Aspiration
Turbocharged & Intercooled
Alternator
12V - 125A
Dry weight without gear
585 kg / 1290 lbs
Dimensions
1440 mm x 748.5 mm x 773.8 mm
Controls
Electronic
Certifications
RCD 2 IMO Tier 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length measured with with KMH61A-2 gearbox & high-riser elbow
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]
Alternator 12V – 120A
VC10 Vessel Control System
Fresh water expansion tank
Optional Accessories
High-riser mixing elbow [instead of L-elbow]
Flexible mounts Barry
Flexible mounts Bridgestone
Secondary alternator 12V – 120A or 24V – 45A
Extension harness [3m, 5m, 10m]
Second station
JC20 Inboard Joystick
NMEA2000 Engine monitoring system
SOLAS including Certificate [factory fit only]
Hot water kit
Water separator
Lube oil drain pump
Bilge pump [12V]
Also you can check product : New Yanmar 4CHE3 78 HP Propulsion Engines (High Speed) Rating M - Sale !!
The new 6LY takes the all the attributes of its forerunners and adds major engineering advances. The beating heart of the engine remains the international powerboat racewinning compact 5.8 -litre in-line six-cylinder YANMAR engine block that over three decades has cemented its popularity with boat designers, builders and owners who laud its performance, fuel efficiency, reliability and smooth and quiet operation.
New Yanmar 8LV320 (Z) 320HP Inboard Diesel Engine - Sale !! (8LV320 (Z))
For ski boats to fast sports craft to luxury cruisers – new build or repowering – the 8LV is at the forefront of today’s propulsion technology, providing the kind of high end performance associated with V8 gasolene engines, but with all of the solid, long-life and cost-effective benefi ts of diesel. This V8 can be matched perfectly with Yanmar’s latest twin-propeller sterndrive, the ZT370, or to a KMH50 inboard transmission. Yanmar remains dedicated to achieving maximum performance from minimum weight and the 8LV proves the point: another big displacement engine, weighing in dry at a mere 435 kilograms.
The 8LV provides boaters with the best-in-class power band. It idles at 550 rpm, capable of crawling speed in the marina, aided further by the hydraulic clutch of the ZT370 or KMH50 drive systems. Maximum engine speed is a big 3,800 rpm – well ahead of other engines in this segment. You can enjoy high power, high torque. Low noise, low vibration. You can go much further on a tank of fuel. There is the advantage of a 12 volt, 180 amp alternator to charge all your onboard electrics. The 8LV uses Yanmar’s new CAN-bus control system, the Yanmar VCS, so you don’t have to rely on anyone else. Then there is easy installation, simple servicing, and all that worlwide Yanmar support, wherever, whenever.
Specifications
Rated Output
235 kW / 320 mhp
Rated Speed
3800 rpm
Displacement
4.46 L / 272 cu. in
No. of cylinders
8 cylinders
Cylinder Bore x Stroke
86 mm x 96 mm / 3.38 in x 3.78 in
Combustion system
Direct Injection, Denso Common Rail System
Aspiration
Twin Turbocharged & Intercooled
Alternator
12V - 180A
Dry weight without gear
435 kg / 959 lbs
Dimensions
1340 mm x 880 mm x 766 mm
Controls
Electronic
Certifications
RCD 2 IMO Tier 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Dimensions includes KMH50A gearbox with standard mixing elbow
Measured with through drive exhaust, without sterndrive (1043mm x 886mm x 1198mm)
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]*
Through drive exhaust**
Alternator 12V – 180A
VC10 Vessel Control System
Power steering**
Flexible mounts
Fresh water expansion tank
Opposite dipstick
*Inboard model
**Sterndrive model
Optional Accessories
High-riser mixing elbow [instead of L-elbow]*
Through hull exhaust**
Extension harness [3m, 5m, 10m]
Second station
JC20 Inboard Joystick*
JC10 Sterndrive Joystick**
NMEA2000 Engine monitoring system
SOLAS including Certificate [factory fit only]
Hot water connection
Water separator
Front PTO pully [V-belt type A or B]
Power steering pump*
Power steering cooler*
Electric shift**
Exhaust cooling water bypass
Lube oil drain pump
Bilge pump [12V]
Also you can check product : New Yanmar 8LV350 (Z) 350HP Inboard Diesel Engine - Sale !!
The 8LV provides boaters with the best-in-class power band. It idles at 550 rpm, capable of crawling speed in the marina, aided further by the hydraulic clutch of the ZT370 or KMH50 drive systems. Maximum engine speed is a big 3,800 rpm – well ahead of other engines in this segment. You can enjoy high power, high torque. Low noise, low vibration. You can go much further on a tank of fuel. There is the advantage of a 12 volt, 180 amp alternator to charge all your onboard electrics. The 8LV uses Yanmar’s new CAN-bus control system, the Yanmar VCS, so you don’t have to rely on anyone else. Then there is easy installation, simple servicing, and all that worlwide Yanmar support, wherever, whenever.
Specifications
Rated Output
235 kW / 320 mhp
Rated Speed
3800 rpm
Displacement
4.46 L / 272 cu. in
No. of cylinders
8 cylinders
Cylinder Bore x Stroke
86 mm x 96 mm / 3.38 in x 3.78 in
Combustion system
Direct Injection, Denso Common Rail System
Aspiration
Twin Turbocharged & Intercooled
Alternator
12V - 180A
Dry weight without gear
435 kg / 959 lbs
Dimensions
1340 mm x 880 mm x 766 mm
Controls
Electronic
Certifications
RCD 2 IMO Tier 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Dimensions includes KMH50A gearbox with standard mixing elbow
Measured with through drive exhaust, without sterndrive (1043mm x 886mm x 1198mm)
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]*
Through drive exhaust**
Alternator 12V – 180A
VC10 Vessel Control System
Power steering**
Flexible mounts
Fresh water expansion tank
Opposite dipstick
*Inboard model
**Sterndrive model
Optional Accessories
High-riser mixing elbow [instead of L-elbow]*
Through hull exhaust**
Extension harness [3m, 5m, 10m]
Second station
JC20 Inboard Joystick*
JC10 Sterndrive Joystick**
NMEA2000 Engine monitoring system
SOLAS including Certificate [factory fit only]
Hot water connection
Water separator
Front PTO pully [V-belt type A or B]
Power steering pump*
Power steering cooler*
Electric shift**
Exhaust cooling water bypass
Lube oil drain pump
Bilge pump [12V]
Also you can check product : New Yanmar 8LV350 (Z) 350HP Inboard Diesel Engine - Sale !!
For ski boats to fast sports craft to luxury cruisers – new build or repowering – the 8LV is at the forefront of today’s propulsion technology, providing the kind of high end performance associated with V8 gasolene engines, but with all of the solid, long-life and cost-effective benefi ts of diesel.The 8LV provides boaters with the best-in-class power band. It idles at 550 rpm, capable of crawling speed in the marina, aided further by the hydraulic clutch of the ZT370 or KMH50 drive systems. Maximum engine speed is a big 3,800 rpm – well ahead of other engines in this segment. You can enjoy high power, high torque. Low noise, low vibration. You can go much further on a tank of fuel. There is the advantage of a 12 volt, 180 amp alternator to charge all your onboard electrics. The 8LV uses Yanmar’s new CAN-bus control system, the Yanmar VCS, so you don’t have to rely on anyone else. Then there is easy installation, simple servicing, and all that worldwide Yanmar support, wherever, whenever.
New Yanmar 8LV350 (Z) 350HP Inboard Diesel Engine - Sale !! (8LV350 (Z))
YANMAR powerboat engines deliver outstanding power, speed, efficiency, and reliability. Our engines have proven to be the ideal solution for multiple applications, commercial and recreational, given a customizable options range - available for shaft, stern, and jet drives, with SOLAS and semi 2-pole option, high power primary and secondary alternators, purpose-built plug & play interconnectivity to any NMEA or J1939 device, and more. YANMAR engines deliver 5x Best in Class product features with the added benefit of the best global support network in the marine industry.
The 8LV provides boaters with the best-in-class power band. It idles at 550 rpm, capable of crawling speed in the marina, aided further by the hydraulic clutch of the ZT370 or KMH50 drive systems. Maximum engine speed is a big 3,800 rpm – well ahead of other engines in this segment. You can enjoy high power, high torque. Low noise, low vibration. You can go much further on a tank of fuel. There is the advantage of a 12 volt, 180 amp alternator to charge all your onboard electrics. The 8LV uses Yanmar’s new CAN-bus control system, the Yanmar VCS, so you don’t have to rely on anyone else. Then there is easy installation, simple servicing, and all that worldwide Yanmar support, wherever, whenever.
Specifications
Rated Output
257 kW / 350 mhp
Rated Speed
3800 rpm
Displacement
4.46 L / 272 cu. in
No. of cylinders
8 cylinders
Cylinder Bore x Stroke
86 mm x 96 mm / 3.38 in x 3.78 in
Combustion system
Direct Injection, Denso Common Rail System
Aspiration
Twin Turbocharged & Intercooled
Alternator
12V - 180A
Dry weight without gear
435 kg / 959 lbs
Dimensions
1340 mm x 880 mm x 766 mm
Controls
Electronic
Certifications
RCD 2 IMO Tier 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Dimensions includes KMH50A gearbox with standard mixing elbow
Measured with through drive exhaust, without sterndrive (1043mm x 886mm x 1198mm)
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]*
Through drive exhaust**
Alternator 12V – 180A
VC10 Vessel Control System
Power steering**
Flexible mounts
Fresh water expansion tank
Opposite dipstick
*Inboard model
**Sterndrive model
Optional Accessories
High-riser mixing elbow [instead of L-elbow]*
Through hull exhaust**
Extension harness [3m, 5m, 10m]
Second station
JC20 Inboard Joystick*
JC10 Sterndrive Joystick**
NMEA2000 Engine monitoring system
SOLAS including Certificate [factory fit only]
Hot water connection
Water separator
Front PTO pully [V-belt type A or B]
Power steering pump*
Power steering cooler*
Electric shift**
Exhaust cooling water bypass
Lube oil drain pump
Also you can check product : New Yanmar 8LV370 (Z) 370HP Inboard Diesel Engine - Sale !!
The 8LV provides boaters with the best-in-class power band. It idles at 550 rpm, capable of crawling speed in the marina, aided further by the hydraulic clutch of the ZT370 or KMH50 drive systems. Maximum engine speed is a big 3,800 rpm – well ahead of other engines in this segment. You can enjoy high power, high torque. Low noise, low vibration. You can go much further on a tank of fuel. There is the advantage of a 12 volt, 180 amp alternator to charge all your onboard electrics. The 8LV uses Yanmar’s new CAN-bus control system, the Yanmar VCS, so you don’t have to rely on anyone else. Then there is easy installation, simple servicing, and all that worldwide Yanmar support, wherever, whenever.
Specifications
Rated Output
257 kW / 350 mhp
Rated Speed
3800 rpm
Displacement
4.46 L / 272 cu. in
No. of cylinders
8 cylinders
Cylinder Bore x Stroke
86 mm x 96 mm / 3.38 in x 3.78 in
Combustion system
Direct Injection, Denso Common Rail System
Aspiration
Twin Turbocharged & Intercooled
Alternator
12V - 180A
Dry weight without gear
435 kg / 959 lbs
Dimensions
1340 mm x 880 mm x 766 mm
Controls
Electronic
Certifications
RCD 2 IMO Tier 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Dimensions includes KMH50A gearbox with standard mixing elbow
Measured with through drive exhaust, without sterndrive (1043mm x 886mm x 1198mm)
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]*
Through drive exhaust**
Alternator 12V – 180A
VC10 Vessel Control System
Power steering**
Flexible mounts
Fresh water expansion tank
Opposite dipstick
*Inboard model
**Sterndrive model
Optional Accessories
High-riser mixing elbow [instead of L-elbow]*
Through hull exhaust**
Extension harness [3m, 5m, 10m]
Second station
JC20 Inboard Joystick*
JC10 Sterndrive Joystick**
NMEA2000 Engine monitoring system
SOLAS including Certificate [factory fit only]
Hot water connection
Water separator
Front PTO pully [V-belt type A or B]
Power steering pump*
Power steering cooler*
Electric shift**
Exhaust cooling water bypass
Lube oil drain pump
Also you can check product : New Yanmar 8LV370 (Z) 370HP Inboard Diesel Engine - Sale !!
YANMAR powerboat engines deliver outstanding power, speed, efficiency, and reliability. Our engines have proven to be the ideal solution for multiple applications, commercial and recreational, given a customizable options range - available for shaft, stern, and jet drives, with SOLAS and semi 2-pole option, high power primary and secondary alternators, purpose-built plug & play interconnectivity to any NMEA or J1939 device, and more. YANMAR engines deliver 5x Best in Class product features with the added benefit of the best global support network in the marine industry.
New Yanmar 4LV195 (Z) 195HP Inboard Diesel Engine - Sale !! (4LV195 (Z))
YANMAR powerboat engines deliver outstanding power, speed, efficiency, and reliability. Our engines have proven to be the ideal solution for multiple applications, commercial and recreational, given a customizable options range - available for shaft, stern, and jet drives, with SOLAS and semi 2-pole option, high power primary and secondary alternators, purpose-built plug & play interconnectivity to any NMEA or J1939 device, and more. YANMAR engines deliver 5x Best in Class product features with the added benefit of the best global support network in the marine industry.
Combining the latest engine technologies, including new generation common-rail systems and the most advanced, complete combustion in YANMAR’s line, the 4LV Series is undoubtedly cleaner, quieter, and produces more torque & acceleration than any other engine in its class.
The 4LV proves to be an extremely efficient engine without any compromise on quality. Featuring Thermo Swing Wall Insulation Technology and incorporating the newest system in common-rail technology, the mid-range engines deliver maximum performance and reliability, while maintaining minimal fuel consumption and exceptionally low noise & emission levels. By exceeding the strict EPA Tier 3 and EU RCD Stage 2 emission regulations, the engines feature virtually smoke and odor free operation.
Equally, the 4LV doesn’t disappoint in performance. The 2.8 L displacement delivers a powerful low-end torque performance. This results in a stunning acceleration and really sets these engines apart from others in their power range.
To ensure support of advancing marine technologies, direct connectivity to NMEA and J1939 CAN-bus networks has been purpose engineered into the 4LV range, allowing future-proofed integration to any multifunction bridge display.
Over and above the impressive performance, the resounding benefit of the 4LV Series remains its versatility. Fulfilling needs across all boating applications, the 4LV is the perfect solution for new builds and repowering. It is compact and easily fits into previous model footprints. An ideal installation for sailboats, motor boats, or light commercial vessels, the 4LV range will be complemented by a choice of YANMAR’s expanding controls, including the VC10 electronic control panel, providing real time diagnostics, and the JC20 joystick system, providing innovative maneuvering solutions.
Specifications
Rated Output
143 kW / 195 mhp
Rated Speed
3500 rpm
Displacement
2.755 L / 168 cu. in
No. of cylinders
4 cylinders
Cylinder Bore x Stroke
92 mm x 103.6 mm / 3.6 in x 4 in
Combustion system
Direct Injection, Denso Common Rail System
Aspiration
Turbocharged & Intercooled
Alternator
Denso 12V - 130A
Dry weight without gear
334 kg / 736 lbs
Dimensions
1151 mm x 755 mm x 772 mm
Controls
Mechanical (optional - VC10 system)
Certifications
RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length includes KMH50A marine gear
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]*
Through drive exhaust**
Alternator 12V – 130A
B25 panel*
VC10 Vessel Control System**
Power steering**
Mechanical throttle sensor*
Flexible mounts
Fresh water expansion tank
Optional Accessories
High-riser mixing elbow [instead of L-elbow]*
Through hull exhaust**
Secondary alternator 12V – 130A or 24V – 110A including smart regulator
Extension harness [3m, 5m, 10m, 20m]
Second station
C35 panel*
Sidemount control head*
VC10 Vessel Control System*
JC20 Inboard Joystick*
JC10 Sterndrive Joystick**
NMEA2000 Engine monitoring system
Internal tie-bar
Semi 2-pole
SOLAS including Certificate [factory fit only]
Hot water connection
Water separator
Man Over Board Switch (single)
C-Type trolling (KMH50 only)*
On-board spare parts kit
Also you can check product : New Yanmar 4LHA-DTP (Z) 200HP Inboard Diesel Engine - Sale !!
Combining the latest engine technologies, including new generation common-rail systems and the most advanced, complete combustion in YANMAR’s line, the 4LV Series is undoubtedly cleaner, quieter, and produces more torque & acceleration than any other engine in its class.
The 4LV proves to be an extremely efficient engine without any compromise on quality. Featuring Thermo Swing Wall Insulation Technology and incorporating the newest system in common-rail technology, the mid-range engines deliver maximum performance and reliability, while maintaining minimal fuel consumption and exceptionally low noise & emission levels. By exceeding the strict EPA Tier 3 and EU RCD Stage 2 emission regulations, the engines feature virtually smoke and odor free operation.
Equally, the 4LV doesn’t disappoint in performance. The 2.8 L displacement delivers a powerful low-end torque performance. This results in a stunning acceleration and really sets these engines apart from others in their power range.
To ensure support of advancing marine technologies, direct connectivity to NMEA and J1939 CAN-bus networks has been purpose engineered into the 4LV range, allowing future-proofed integration to any multifunction bridge display.
Over and above the impressive performance, the resounding benefit of the 4LV Series remains its versatility. Fulfilling needs across all boating applications, the 4LV is the perfect solution for new builds and repowering. It is compact and easily fits into previous model footprints. An ideal installation for sailboats, motor boats, or light commercial vessels, the 4LV range will be complemented by a choice of YANMAR’s expanding controls, including the VC10 electronic control panel, providing real time diagnostics, and the JC20 joystick system, providing innovative maneuvering solutions.
Specifications
Rated Output
143 kW / 195 mhp
Rated Speed
3500 rpm
Displacement
2.755 L / 168 cu. in
No. of cylinders
4 cylinders
Cylinder Bore x Stroke
92 mm x 103.6 mm / 3.6 in x 4 in
Combustion system
Direct Injection, Denso Common Rail System
Aspiration
Turbocharged & Intercooled
Alternator
Denso 12V - 130A
Dry weight without gear
334 kg / 736 lbs
Dimensions
1151 mm x 755 mm x 772 mm
Controls
Mechanical (optional - VC10 system)
Certifications
RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length includes KMH50A marine gear
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]*
Through drive exhaust**
Alternator 12V – 130A
B25 panel*
VC10 Vessel Control System**
Power steering**
Mechanical throttle sensor*
Flexible mounts
Fresh water expansion tank
Optional Accessories
High-riser mixing elbow [instead of L-elbow]*
Through hull exhaust**
Secondary alternator 12V – 130A or 24V – 110A including smart regulator
Extension harness [3m, 5m, 10m, 20m]
Second station
C35 panel*
Sidemount control head*
VC10 Vessel Control System*
JC20 Inboard Joystick*
JC10 Sterndrive Joystick**
NMEA2000 Engine monitoring system
Internal tie-bar
Semi 2-pole
SOLAS including Certificate [factory fit only]
Hot water connection
Water separator
Man Over Board Switch (single)
C-Type trolling (KMH50 only)*
On-board spare parts kit
Also you can check product : New Yanmar 4LHA-DTP (Z) 200HP Inboard Diesel Engine - Sale !!
Featuring the latest engine technologies, the 4LV Series is undoubtedly cleaner, quieter, and produces more torque & acceleration than any other engine in its class. The 4LV is the ideal solution for sailing yachts over 50 ft, super yacht tenders, small motorboats and light duty commercial vessels.Combining the latest engine technologies, including new generation common-rail systems and the most advanced, complete combustion in YANMAR’s line, the 4LV Series is undoubtedly cleaner, quieter, and produces more torque & acceleration than any other engine in its class.
New Yanmar 4LV170 (Z) 170HP Inboard Diesel Engine - Sale !! (4LV170 (Z))
Featuring the latest engine technologies, the 4LV Series is undoubtedly cleaner, quieter, and produces more torque & acceleration than any other engine in its class. The 4LV is the ideal solution for sailing yachts over 50 ft, super yacht tenders, small motorboats and light duty commercial vessels.
The 4LV proves to be an extremely efficient engine without any compromise on quality. Featuring the newest system in common-rail technology, the mid-range engines deliver maximum performance and reliability, while maintaining minimal fuel consumption and exceptionally low noise & emission levels. By exceeding the strict EPA Tier 3 and EU RCD Stage 2 emission regulations, the engines feature virtually smoke and odor free operation. Equally, the 4LV doesn’t disappoint in performance. The 2.8 L displacement delivers a powerful low-end torque performance. This results in a stunning acceleration and really sets these engines apart from others in their power range. To ensure support of advancing marine technologies, direct connectivity to NMEA and J1939 CAN-bus networks has been purpose engineered into the 4LV range, allowing future-proofed integration to any multifunction bridge display.
Specifications
Rated Output
125 kW / 170 mhp
Rated Speed
3500 rpm
Displacement
2.755 L / 168 cu. in
No. of cylinders
4 cylinders
Cylinder Bore x Stroke
92 mm x 103.6 mm / 3.6 in x 4 in
Combustion system
Direct Injection, Denso Common Rail System
Aspiration
Turbocharged & Intercooled
Alternator
Denso 12V - 130A
Dry weight without gear
334 kg / 736 lbs
Dimensions
1151 mm x 755 mm x 772 mm
Controls
Mechanical (optional - VC10 system)
Certifications
RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length includes KMH50A marine gear
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]*
Through drive exhaust**
Alternator 12V – 130A
B25 panel*
VC10 Vessel Control System**
Power steering**
Mechanical throttle sensor*
Flexible mounts
Fresh water expansion tank
*Inboard model
*Sterndrive model
Optional Accessories
High-riser mixing elbow [instead of L-elbow]*
Through hull exhaust**
Secondary alternator 12V – 130A or 24V – 110A including smart regulator
Extension harness [3m, 5m, 10m, 20m]
Second station
C35 panel*
Sidemount control head*
VC10 Vessel Control System*
JC20 Inboard Joystick*
JC10 Sterndrive Joystick**
NMEA2000 Engine monitoring system
Internal tie-bar
Semi 2-pole
SOLAS including Certificate [factory fit only]
Hot water connection
Water separator
Man Over Board Switch (single)
C-Type trolling (KMH50 only)*
On-board spare parts kit
Also you can check product : New Yanmar 4LV195 (Z) 195HP Inboard Diesel Engine - Sale !!
The 4LV proves to be an extremely efficient engine without any compromise on quality. Featuring the newest system in common-rail technology, the mid-range engines deliver maximum performance and reliability, while maintaining minimal fuel consumption and exceptionally low noise & emission levels. By exceeding the strict EPA Tier 3 and EU RCD Stage 2 emission regulations, the engines feature virtually smoke and odor free operation. Equally, the 4LV doesn’t disappoint in performance. The 2.8 L displacement delivers a powerful low-end torque performance. This results in a stunning acceleration and really sets these engines apart from others in their power range. To ensure support of advancing marine technologies, direct connectivity to NMEA and J1939 CAN-bus networks has been purpose engineered into the 4LV range, allowing future-proofed integration to any multifunction bridge display.
Specifications
Rated Output
125 kW / 170 mhp
Rated Speed
3500 rpm
Displacement
2.755 L / 168 cu. in
No. of cylinders
4 cylinders
Cylinder Bore x Stroke
92 mm x 103.6 mm / 3.6 in x 4 in
Combustion system
Direct Injection, Denso Common Rail System
Aspiration
Turbocharged & Intercooled
Alternator
Denso 12V - 130A
Dry weight without gear
334 kg / 736 lbs
Dimensions
1151 mm x 755 mm x 772 mm
Controls
Mechanical (optional - VC10 system)
Certifications
RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length includes KMH50A marine gear
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]*
Through drive exhaust**
Alternator 12V – 130A
B25 panel*
VC10 Vessel Control System**
Power steering**
Mechanical throttle sensor*
Flexible mounts
Fresh water expansion tank
*Inboard model
*Sterndrive model
Optional Accessories
High-riser mixing elbow [instead of L-elbow]*
Through hull exhaust**
Secondary alternator 12V – 130A or 24V – 110A including smart regulator
Extension harness [3m, 5m, 10m, 20m]
Second station
C35 panel*
Sidemount control head*
VC10 Vessel Control System*
JC20 Inboard Joystick*
JC10 Sterndrive Joystick**
NMEA2000 Engine monitoring system
Internal tie-bar
Semi 2-pole
SOLAS including Certificate [factory fit only]
Hot water connection
Water separator
Man Over Board Switch (single)
C-Type trolling (KMH50 only)*
On-board spare parts kit
Also you can check product : New Yanmar 4LV195 (Z) 195HP Inboard Diesel Engine - Sale !!
Featuring the latest engine technologies, the 4LV Series is undoubtedly cleaner, quieter, and produces more torque & acceleration than any other engine in its class. The 4LV is the ideal solution for sailing yachts over 50 ft, super yacht tenders, small motorboats and light duty commercial vessels.Equally, the 4LV doesn’t disappoint in performance. The 2.8 L displacement delivers a powerful low-end torque performance. This results in a stunning acceleration and really sets these engines apart from others in their power range.
New Yanmar 6LF550 550HP Inboard Diesel Engine - Sale !! (6LF550)
COMPACT AND POWERFUL
The 6LF engine is a compact and powerful common rail diesel engine, perfect for planing and semi-planing vessels, both recreational and light duty commercial. Controlled by the YANMAR VC20 system, it expands YANMAR brand’s line with higher horsepower, providing the largest common rail, electronically managed marine diesel line-up in the industry.
The YANMAR 6LF meets EPA Tier 3 and EU RCD Stage 2 emissions regulations while also providing a wide range of fuel compatibility to meet requirements for various government service applications.
The 6LF has been customized with YANMAR’s proprietary fuel mapping and a larger mixing elbow for reliable and consistent output performance. It is custom engineered to offer direct connectivity to NMEA and J1939 CAN-bus networks. It comes available with a number of standard and optional features, including single- and 2-pole installation, various ZF gears, and custom secondary alternator options to meet nearly any complex application.
FEATURES
Suitable for large superyacht tenders, planing and semi-planing motoryachts up to 55ft, and light-duty commercial vessels
High power, low weight, and compact installation creating a high power density of 82 mhp/L for the 550 mhp model
Controlled by YANMAR VC20 Vessel Control System
Complements the largest common rail recreational and light duty commercial diesel engine line-up
Exceeds EPA Tier 3 and EU RCD Stage 2 emissions regulations
DETAILS
Available in 3 output models – 485, 530, 550 mhp
A proven solution for jet and shaft drives
Controlled electronically by YANMAR VC20 Vessel Control System, for 3 engines with up to 4 stations
Custom YANMAR fuel mapping and mixing elbow & bracket for reliable performance output
Custom YANMAR gear box configuration to reduce vibration and increase efficiency
Custom engine packaging for efficient installation
Certified for recreational and light duty commercial applications*
*Please note, the 6LF550 is not EPA Commercial certified.
Specifications
Rated Output
404 kW / 550 mhp
Rated Speed
3000 rpm
Displacement
6.728 L / 411 cu. in
No. of cylinders
6 cylinders
Cylinder Bore x Stroke
104 mm x 132 mm / 4.10 in x 5.20 in
Configuration
In-line, 4-stroke, vertical, water-cooled diesel engine Combustion system
Direct Injection, Bosch Common Rail System
Aspiration
Turbocharged & Intercooled
Alternator 12V - 90A, 24V - 70A
Dry weight without gear
780 kg / 1720 lbs
Dimensions
1519 mm x 893 mm x 881 mm
Controls
Electronic
Certifications
RCD 2 IMO Tier 2 EPA Tier 3 EMC
Standard Engine Package
Exhaust mixing elbow [high riser]
12V Electric system [single pole] / 24V Electric system [2-pole]
Flexible mounts
Alternator 12V – 90A / 24V – 70A
VC20 Vessel Control System
Electronic CAN-bus control head
Backup Panel
Lubrication oil evacuation pump [manual]
Optional Accessories
Secondary alternator 24V – 110A including smart regulator
Secondary alternator 12V – 125A or 24V – 65A [2-pole]
Second or third station
Front-PTO connection
Hot water connector
NMEA 2000 Engine monitoring system
JC20A Inboard Joystick
Extension harness [3m, 5m, 10m]
Man Over Board Switch
Also you can check product : New Yanmar 6LY440 440HP Inboard Diesel Engine - Sale !!
The 6LF engine is a compact and powerful common rail diesel engine, perfect for planing and semi-planing vessels, both recreational and light duty commercial. Controlled by the YANMAR VC20 system, it expands YANMAR brand’s line with higher horsepower, providing the largest common rail, electronically managed marine diesel line-up in the industry.
New Yanmar 4JH4-TE 75HP Inboard Diesel Engine - Sale !! (4JH4-TE)
Yanmar JH4 engines have been around a while now. Starting at 74 brake horsepower and rising to 108bhp, these Yanmar engines are the smallest in the manufacturer’s marine engine recreational range to have turbocharging. Both models have four valves per cylinder, though still with pushrod valve actuation, and mechanical engine management and straightforward distributor pump-type fuel injection for reliability. No potential issues with common rail here!
Sensibly they have direct injection, which is really the way to go when turbocharging an engine. Adding a turbocharger to an indirect injection engine can stress the cylinder head around the pre-combustion chamber outlet.
Though having only straight turbocharging (no aftercooler) the Yanmar 4JH4-TE model is the largest Yanmar to be mated with a saildrive.
Specifications
Rated Output
55.2 kW / 75 mhp
Rated Speed
3200 rpm
Displacement
1.995 L / 121.7 cu. in
No. of cylinders
4 cylinders
Cylinder Bore x Stroke
84 mm x 90 mm / 3.31 in x 3.54 in
Combustion system
Direct Injection, Bosch Distributor Type VE Pump
Aspiration
Turbocharged
Alternator
12V - 125A
Dry weight without gear
207 kg / 456 lbs
Dimensions
903 mm x 661 mm x 659 mm
Controls
Mechanical
Certifications
RCD 1 EPA Tier 2 BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length includes KM4A2 marine gear
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]
Alternator 12V – 125A
B20 panel
Flexible mounts
Expansion tank for fresh water cooling system
Electric stop solenoid
Belt safety cover
Optional Accessories
High-riser mixing elbow [instead of L-elbow]
Secondary alternator 12V – 130A or 24V – 75A including smart regulator
C30 panel
Extension wire harness [4m, 6m, 10m]
Dual harness [for 2nd station]
TFX Sidemount control head
SOLAS including Certificate [factory fit only]
Hot water kit with cocks
Extension saildrive leg [75 mm]
Propeller cone nut kit SD60
Air heater [glow]
Trolling valve [only for KMH4A]
On-board spare parts kit
Also you can check product : New Yanmar 4JH4-HTE 110HP Inboard Diesel Engine - Sale !!
Sensibly they have direct injection, which is really the way to go when turbocharging an engine. Adding a turbocharger to an indirect injection engine can stress the cylinder head around the pre-combustion chamber outlet.
Though having only straight turbocharging (no aftercooler) the Yanmar 4JH4-TE model is the largest Yanmar to be mated with a saildrive.
Specifications
Rated Output
55.2 kW / 75 mhp
Rated Speed
3200 rpm
Displacement
1.995 L / 121.7 cu. in
No. of cylinders
4 cylinders
Cylinder Bore x Stroke
84 mm x 90 mm / 3.31 in x 3.54 in
Combustion system
Direct Injection, Bosch Distributor Type VE Pump
Aspiration
Turbocharged
Alternator
12V - 125A
Dry weight without gear
207 kg / 456 lbs
Dimensions
903 mm x 661 mm x 659 mm
Controls
Mechanical
Certifications
RCD 1 EPA Tier 2 BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length includes KM4A2 marine gear
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]
Alternator 12V – 125A
B20 panel
Flexible mounts
Expansion tank for fresh water cooling system
Electric stop solenoid
Belt safety cover
Optional Accessories
High-riser mixing elbow [instead of L-elbow]
Secondary alternator 12V – 130A or 24V – 75A including smart regulator
C30 panel
Extension wire harness [4m, 6m, 10m]
Dual harness [for 2nd station]
TFX Sidemount control head
SOLAS including Certificate [factory fit only]
Hot water kit with cocks
Extension saildrive leg [75 mm]
Propeller cone nut kit SD60
Air heater [glow]
Trolling valve [only for KMH4A]
On-board spare parts kit
Also you can check product : New Yanmar 4JH4-HTE 110HP Inboard Diesel Engine - Sale !!
Yanmar JH4 engines have been around a while now. Starting at 74 brake horsepower and rising to 108bhp, these Yanmar engines are the smallest in the manufacturer’s marine engine recreational range to have turbocharging. Both models have four valves per cylinder, though still with pushrod valve actuation, and mechanical engine management and straightforward distributor pump-type fuel injection for reliability. No potential issues with common rail here!